本文以AlN和Al2O3为原料采用无压烧结的方法制备AlON,研究了不同温度对AlON合成物相的影响,及添加剂MsO、Y2O3和CaO对其致密化的影响.通过X射线衍射仪、扫描电镜和阿基米德原理对其物相、显微结构和体积密度等性能进行表征.研究结果表明:在1700℃时AlON开始生成,随着温度升高AlON相含量越多,最佳合成温度为1800℃,当温度达到1900℃时出现多种AlON相;在1800℃时,添加剂MsO、Y2O3和CaO均能促进AlON的致密化,而添加剂CaO添加量为20wt%时,AlON致密化最佳,气孔率最小为5.43%,密度为3.14 g/cm3.
参考文献
[1] | James W. McCauley;Parimal Patel;Mingwei Chen .AlON: A brief history of its emergence and evolution[J].Journal of the European Ceramic Society,2009(2):223-236. |
[2] | 姜华伟,杜洪兵,田庭燕,彭珍珍,刘妍,吕科.AlON透明陶瓷研究进展[J].硅酸盐通报,2009(02):298-302. |
[3] | X.J. Zhao;H.Q. Ru;D.L Chen .Thermal shock behavior of nano-sized SiC particulate reinforced AlON composites[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2012(5):402-410. |
[4] | Zhao, X.J.;Zhang, N.;Ru, H.Q.;Liang, B.;Chen, D.L..Mechanical properties and toughening mechanisms of silicon carbide nano-particulate reinforced Alon composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:118-124. |
[5] | XJ. Zhao;D.L. Chen;H.Q. Ru .Oxidation behaviour of nano-sized SiC particulate reinforced Alon composites[J].Journal of the European Ceramic Society,2011(13):2255-2265. |
[6] | 李悦彤,杨静.氧化铝陶瓷低温烧结助剂的研究进展[J].硅酸盐通报,2011(06):1328-1332. |
[7] | 袁贤阳,张芳,刘学建,张昭,王士维.反应烧结制备AlON透明陶瓷[J].无机材料学报,2011(05):499-502. |
[8] | 武琪,王思青,张长瑞,姜勇刚,李斌.耐高温透明AlON陶瓷的研究进展与展望[J].硅酸盐通报,2013(04):657-662. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%