对GCr15轴承钢在圆-椭圆-圆孔型轧制后的横截面积进行了计算,并根据棒材生产线上的现场数据,考虑轧制速度对宽展的影响,通过使计算道次延伸率与实际值误差的标准差最小对现有模型中的宽展修正系数进行了优化,使轧后横截面积的计算值与实际值误差在士3%以内,说明模型具有较高的精度,可以为轧制GCr15轴承钢时的孔型设计和轧制工艺设定提供参考.
参考文献
| [1] | Shinokura Takai K A.A New Method for Calculating Spread in Rod Rolling[A].Cincinati..ASM,1983:175. |
| [2] | Lee Y .Prediction of the Surface Profile and Area of the Exit Cross Section of Workpieee in Round-Oval-Round Pass Sequence[J].ISIJ International,2002,42(07):726. |
| [3] | 赵志业.金属塑性变形与轧制理论[M].北京:冶金工业出版社,1994 |
| [4] | Y. Lee;S. Choi;Y. H. Kim .Mathematical model and experimental validation of surface profile of a workpiece in round-oval-round pass sequence[J].Journal of Materials Processing Technology,2000(1):87-96. |
| [5] | Lee Y.;Choi S. .New approach for the prediction of stress free surface profile of a workpiece in rod rolling[J].ISIJ International,2000(6):624-626. |
| [6] | 董永刚,张文志,宋剑锋.棒材轧制轧件出口断面形状预测及平均轧辊半径的新计算模型[J].塑性工程学报,2007(05):96-101. |
| [7] | Y. Dong;W. Zhang;J. Song .A new analytical model for the calculation of mean roll radius in round-oval-round alloy bar rolling[J].ISIJ International,2006(10):1458-1466. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%