Effects of Applied Stresses on Martensite Transformation in AISI4340 Steel

钢铁研究学报(英文版), 2007, 14(6): 63-67.

^1, , ^2, , ^3, , ^4, , ^5,

1.State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China;Department of Metallurgical Engineering, Yonsei University, Seoul 120-749, South Korea

2.Department of Metallurgical Engineering, Yonsei University, Seoul 120-749, South Korea

3.Department of Metallurgical Engineering, Yonsei University, Seoul 120-749, South Korea

4.State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China

5.State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China

基金项目: 国家高技术研究发展计划(863计划)(2001AA332020)

Effects of Applied Stresses on Martensite Transformation in AISI4340 Steel

ZHAO Hong-zhuang ^1, , Seok-jae LEE ^2, , Young-kook LEE ^3, , LIU Xiang-hua ^4, , WANG Guo-dong ^5,

1.State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China;Department of Metallurgical Engineering, Yonsei University, Seoul 120-749, South Korea

2.Department of Metallurgical Engineering, Yonsei University, Seoul 120-749, South Korea

3.Department of Metallurgical Engineering, Yonsei University, Seoul 120-749, South Korea

4.State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China

5.State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China

Keywords： applied stress

This study aims at the experimental analysis of the transformation induced plasticity (TRIP) phenomenon.Experiments are conducted in which martensite is allowed to grow under the influence of a series of externally applied stresses. The magnitude of the applied stresses is less than 67% of the yield strength of austenite σγ (Ts). Since there is no obvious difference between the transformation plasticity under tension and the compression for the lower applied stresses, only compressive stresses are applied. The results confirm that the transformation plasticity is proportional to the applied stress if the latter does not exceed 67% of σγ (Ts). The TRIP-strain, the kineties, and their dependence on the applied stresses are studied. The comparison between calculated results and experimental results shows that the model accurately describes the phenomenon.

参考文献

[1]	Taleb L.;Sidoroff F. .A micromechanical modeling of the Greenwood-Johnson mechanism in transformation induced plasticity[J].International Journal of Plasticity,2003(10):1821-1842.
[2]	Heung Nam Han;Dong-Woo Suh .A model for transformation plasticity during bainite transformation of steel under external stress[J].Acta materialia,2003(16):4907-4917.
[3]	Fischer FD.;Werner E.;Tanaka K.;Cailletaud G.;Antretter T.;Reisner G. .A new view on transformation induced plasticity (TRIP)[J].International Journal of Plasticity,2000(7-8):723-748.
[4]	Heung Nam Han;Jae Kon Lee;Hong Joon Kim .A model for deformation, temperature and phase transformation behavior of steels on run-out table in hot strip mill[J].Journal of Materials Processing Technology,2002(1/3):216-225.
[5]	LIU Zhuang;WU Zhao-ji;WU Jing-zhi.Numerical Simulation on Heat Treatment[M].北京:科学出版社,1996
[6]	Lakhdar Taleb;Nathalie Cavallo;Francois Waeckel .Experimental Analysis of Transformation Plasticity[J].International Journal of Plasticity,2000,17(01):1-20.
[7]	Singh SB.;Bhadeshia HKDH. .Estimation of bainite plate-thickness in low-alloy steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1):72-79.
[8]	Paul G Shewmon.Transformation in Metals[M].New York:McGraw-Hill Book Company,Inc,1969
[9]	Shipway P H;Bhadeshia H K D H .The Effect of Small Stresses on the Kinetics of the Bainite Transformation[J].Materials Science and Engineering,1995,201A(1-2):143-149.

上一张下一张

计量

下载量()
访问量()

作者相关

在本站搜索
在百度学术搜索
在万方数据库搜索
在CNKI搜索

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

Effects of Applied Stresses on Martensite Transformation in AISI4340 Steel

参考文献