欢迎登录材料期刊网

材料期刊网

高级检索

借助OM、TEM研究了高温条件下Ti40阻燃合金的粗晶超塑性变形行为及机理.结果表明:在920℃下,应变速率为5×10~(-5)~1×10~(-2)5s~(-1)的Ti40合金表现出良好的超塑性行为,拉伸延伸率均超过250%,应变速率敏感指数m大于0.3.超塑变形后,粗大的等轴组织细化.TEM分析表明,在变形过程中,位错运动形成亚晶界,亚晶界通过吸收滑移位错形成小角度晶界甚至大角度晶界.Ti40合金的粗晶超塑性是由动态回复和再结晶共同作用的结果.

The superplastic deformation behavior and mechanism of burn-resistant Ti40 alloy with large grains at elevated temperature were investigated by OM and TEM. Results show that Ti40 alloy exhibits excellent superplastic behavior in the strain rate range from 5×10~(-5) to 1×10~(-2) s~(-1) at 920 ℃. All of the tensile elongations exceed 250% while the strain rate sensitivity index m is over 0.3. Optical microstructure shows that the large equiaxed gains are refined after superplastic deformation. TEM observation indicates that an unstable subgrain boundary formed by dislocation during superplastic deformation. The subgrain boundaries were transformed into low-and even high-angle grain boundaries by absorbing gliding dislocations. The superplastic behavior of large-grained Ti40 alloy could be explained by dynamic recovery and recrystallization.

参考文献

[1] Eyloy D.[J].Journal of the Minerals,Metals & Materials Society,1994(06):14.
[2] Russo P A.Titanium '95:Science and Technology[M].Birmingham:Institute of Materials,1995:675.
[3] 赵永庆.阻燃钛合金[J].稀有金属材料与工程,1996(05):1-6.
[4] 赵永庆 et al.[J].机械工程材料,1999,23(01):9.
[5] W. D. Zeng;Y. Shu;X. M. Zhang .Hot workability and microstructure evolution of highly beta stabilised Ti-25V-15Cr-0.3Si alloy[J].Materials Science and Technology,2008(10):1222-1229.
[6] ZHANG Xue-min,ZENG Wei-dong,SHU Ying,ZHOU Yi-gang,ZHAO Yong-qing,WU Huan,YU Han-qing.Fracture criterion for predicting surface cracking of Ti40 alloy in hot forming processes[J].中国有色金属学会会刊(英文版),2009(02):267-271.
[7] Jiang Dongmei et al.[J].Materials Letters,2002,57:747.
[8] Tavassori A A et al.[J].Matallurgical Transaction A,1975,6(03):591.
[9] Morgan G C et al.[J].Materials Science and Engineering,1987,86:159.
[10] Sherby O D et al.[J].Progress in Materials Science,1989,33:169.
[11] Xin Wu et al.[J].Scripta Materialia,2002,46:269.
[12] Paten N E.Titanium'95:Science and Technology[M].Birmingham:Institute of Materials,1995:649.
[13] Griffiths P et al.[J].Acta Metallurgica,1972,20:936.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%