欢迎登录材料期刊网

材料期刊网

高级检索

通过改变次磷酸盐体系的工艺参数制得不同的镍磷合金镀层.采用电化学阻抗谱技术(简称EIS技术)和动电位扫描极化曲线技术,研究了不同工艺参数时镍磷镀层在0.5 mol/L NaCl中性介质中的耐蚀性规律和耐蚀机理.结果表明:电镀镍磷合金镀层耐蚀性随镀液pH值的降低而升高,并随镀液中次磷酸盐浓度的升高而升高,并在次磷酸盐浓度为110 g/L时到最大值;而继续增大次磷酸盐浓度镀层的耐蚀性又降低;低温(40℃)制得的镀层比高温(60℃)下制得的镀层更耐蚀.

参考文献

[1] Hu CC.;Bai A. .Composition control of electroplated nickel-phosphorus deposits[J].Surface & Coatings Technology,2001(2/3):181-187.
[2] Yue Zeng;Shaomin Zhou .In situ surface Raman study of the phosphorus incorporation mechanism during electrodeposition of Ni-P alloys[J].Journal of Electroanalytical Chemistry: An International Journal Devoted to All Aspects of Electrode Kinetics, Interfacial Structure, Properties of Electrolytes, Colloid and Biological Electrochemistry,1999(1):79-83.
[3] 张允诚;胡如南;向荣.电镀手册(第2版)[M].北京:国防工业出版社,1997:574-577.
[4] FANG Jing-li;YE Xiang-rong;FANG Jing .Factors influencing solderability of electroless Ni-P deposits[J].Plating and Surface Finishing,1992,7:44-47.
[5] Zangeneh-Madar K;Vaghefi SMM .The effect of thermochemical treatment on the structure and hardness of electroless Ni-P coated low alloy steel[J].Surface & Coatings Technology,2004(1):65-71.
[6] Xie Haowen;Zhang Bangwei .Effects of preparation technology on the structure and amorphous forming region for electroless Ni-P alloys[J].Journal of Materials Processing Technology,2002(1/2):8-13.
[7] 吴玉程,邓宗钢.非晶态镍磷合金的组织结构与性能[J].中国有色金属学报,1998(03):415-419.
[8] Lo PH.;Lee JT.;Hung MP.;Tsai WT. .THE ELECTROCHEMICAL BEHAVIOR OF ELECTROLESS PLATED NI-P ALLOYS IN CONCENTRATED NAOH SOLUTION[J].Journal of the Electrochemical Society,1995(1):91-96.
[9] Well R;Lee J H;Kim I et al.Comparison of some mechanical and corrosion properties of electroless and electroplated Nickel-Phosphorus alloys[J].Plating and Surface Finishing,1989,2:62-66.
[10] Bai A.;Chuang PY.;Hu CC. .The corrosion behavior of Ni-P deposits with high phosphorous contents in brine media[J].Materials Chemistry and Physics,2003(1):93-100.
[11] Zeller III R L;Salvati L Jr .Effects of phosphorus on corrosion resistance of electroless nickel in 50% sodium hydroxide[J].Corrosion Science,1994,50:457-467.
[12] Angelo ACD.;Lasia A. .SURFACE EFFECTS IN THE HYDROGEN EVOLUTION REACTION ON NI-ZN ALLOY ELECTRODES IN ALKALINE SOLUTIONS[J].Journal of the Electrochemical Society,1995(10):3313-3319.
[13] García-Alonso M C;Escudero M L;López V et al.The corrosion behaviour of laser treated Ni-P alloy coatings on mild steel[J].Corrosion Science,1996,38:515-530.
[14] CHENG Ying-liang;ZHANG Zhao;CAO Fa-he et al.A study of the corrosion of aluminum alloy 2024-T3 under thin electrolyte layers[J].Corrosion Science,2004,46:1649-1667.
[15] 曹楚南.腐蚀电化学原理[M].北京:化学工业出版社,1985:323-344.
[16] 卢燕平.镍-磷合金镀层在盐酸溶液中的耐蚀性[J].材料保护,1991(01):17.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%