全面综述了铝合金先进形变热处理(Thermo-mechanical Treatment,TMT)工艺的分类、原理以及发展历程,介绍了不同形变热处理的特点和国内外在形变热处理领域的研究动态,分析了形变热处理工艺参数对铝合金组织性能的影响规律,总结了形变热处理的缺点、不足以及矛盾之处并提出了可行的解决方案,最后进一步展望了改进形变热处理工艺的方法和途径.
参考文献
| [1] | 李慧中,张新明,陈明安,周卓平,龚敏如.稀土钇对2519合金组织及耐热性能的影响[J].材料科学与工程学报,2005(01):38-41. |
| [2] | 肖艳苹,潘清林,李文斌,刘晓艳,何运斌.含Sc超高强Al-Zn-Mg-Cu-Zr合金均匀化处理[J].材料科学与工程学报,2010(06):920-925. |
| [3] | 田荣璋;王祝堂.铝合金及其加工手册[M].长沙:中南大学出版社,2000:103-108. |
| [4] | E.Di Russo;M.Conserva;F.Gatto;H.Markus .[J].Metallurgical Transactions,1973,4:1133-1144. |
| [5] | E.Di Russo;M.Conserva;F.Gatto;H.Markus .[J].Materials Science and Engineering,1974,14:23-36. |
| [6] | J.Waldman;H.Sulinski;H.Markus .[J].Metallurgical Transactions,1974,5:573-584. |
| [7] | J.A.Wert;N.E.Paton;C.H.Hamilton;M.W.Mahoney .[J].Metallurgical Transactions A,1981,12A:1267-1276. |
| [8] | 张新明,刘玲,贾寓真.拉伸与轧制预变形对2519A铝合金组织与力学性能的影响[J].中国有色金属学报,2010(06):1088-1094. |
| [9] | J.Waldman;H.Sulinski;H.Markus .Processes for the fabrication of 7000 series aluminum alloys[P].US 3847681 |
| [10] | O.-G. Lademo;K.O. Pedersen;T. Berstad;T. Furu;O.S. Hopperstad .An experimental and numerical study on the formability of textured AlZnMg alloys[J].European journal of mechanics, A. Solids,2008(2):116-140. |
| [11] | Mohammad Tajally;Esmaeil Emadoddin .Mechanical and anisotropic behaviors of 7075 aluminum alloy sheets[J].Materials & design,2011(3):1594-1599. |
| [12] | B.R.Ward;S.P.Agrawal;R.F.Ashton .Method of producing superplastic aluminum sheet[P].US 4486244 |
| [13] | L.P.Huang;K.H.Chen;S.Li;M.Song .Influence of hightemperature pre-precipitation on local corrosion behaviors of AlZn-Mg alloy[J].Scripta Materialia,2007,56:305-308. |
| [14] | 黄兰萍,陈康华,李松,刘红卫.高温预析出对Al-Zn-Mg铝合金组织、力学性能和应力腐蚀性能的影响[J].中国有色金属学报,2005(05):727-733. |
| [15] | R. A. Vandermeer .Microstructural descriptors and the effects of nuclei clustering on recrystallization path kinetics[J].Acta materialia,2005(5):1449-1457. |
| [16] | J. Go;W. J. Poole;M. Militzer .Modelling recovery and recrystallisation during annealing of AA 5754 aluminium alloy[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2003(10):1361-1368. |
| [17] | M. V. Markushev .On the Principles of the Deformation Methods of Aluminum-Alloys Grain Refinement to Ultrafine Size: I. Fine-Grained Alloys[J].The Physics of Metals and Metallography,2009(1):43-49. |
| [18] | R.A. Vandermeer;D. Juul Jensen .Effects of Nuclei Clustering on Recrystallization Kinetics[J].Materials Science Forum,2004(Pt.1):193-196. |
| [19] | L. P. Troeger;E. A. Starke Jr. .Particle-stimulated nucleation of recrystallization for grain-size control and superplasticity in an Al-Mg-Si-Cu alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):19-29. |
| [20] | 丁向群,何国求,陈成澍,刘小山,朱正宇.6000系汽车车用铝合金的研究应用进展[J].材料科学与工程学报,2005(02):302-305. |
| [21] | N.(U)nlü;B.M.Gable;G.J.Shifler;E.A.Starke Jr .The effect of cold work on the precipitation of Ω and θ' in a ternary Al-Cu-Mg alloy[J].Metallurgical and Materials Transactions A,2003,34A:2757-2769. |
| [22] | 李慧中,张新明,陈明安,周卓平,龚敏如.预变形对2519铝合金组织与力学性能的影响[J].中国有色金属学报,2004(12):1990-1994. |
| [23] | Mazouz Hamoudi;Bensaada Said;Mohamed Tewfik Bouziane .Influence of Thermomecaniques Treatments on the Proprietes of Al-5.8%Zn-2.7%Mg Alloy[J].Materials sciences and applications,2012(8):509-512. |
| [24] | HE Lizi,ZHANG Haitao,CUI Jianzhong.Effects of Thermomechanical Treatment on the Mechanical Properties and Microstructures of 6013 Alloy[J].武汉理工大学学报(材料科学版)(英文版),2009(02):198-201. |
| [25] | 林高用,杨伟,孙利平,彭大暑.Al-Zn-Mg-Cu-Cr合金厚板组织细化[J].中国有色金属学报,2008(08):1432-1439. |
| [26] | 郑青春,刘志义,宁爱林,曾苏民.超塑预处理对Al-Zn-Mg-Cu铝合金显微组织及力学性能的影响[J].金属热处理,2005(12):23-26. |
| [27] | R. Kaibyshev;T. Sakai;F. Musin .Superplastic behavior of a 7055 aluminum alloy[J].Scripta materialia,2001(12):1373-1380. |
| [28] | 张云崖,邓运来,万里,张新明.形变热处理对Al-Zn-Mg-Cu合金板材组织与硬度的影响[J].金属学报,2011(10):1270-1276. |
| [29] | Ou B.L.;Yang J.G. .Effects of Step-Quench and Aging on Mechanical Properties and Resistance to Stress Corrosion Cracking of 7050 Aluminum Alloy[J].Materials transactions,2000(7):783-789. |
| [30] | T.C.Tsai;T.H.Chuan .[J].Materials Science and Engineering A,1997,225:135-144. |
| [31] | 魏建锋;何明 .[J].西北工业大学学报（自然科学版）,1995,13(04):553-557. |
| [32] | L.Y.Ye;X.M.Zhang;Y.W.Liu;J.G.Tang D.W.Zheng .Effect of two-step aging on recrystallised grain size of Al Mg-Li alloy[J].Materials Science and Technology,2011,27(01):125-131. |
| [33] | L. P. Troeger;E. A. Starke Jr .Microstructural and mechanical characterization of a super plastic 6xxx aluminum alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):102-113. |
| [34] | NING Ai-lin;LIU Zhi-yi;ZENG Su-min .Effect of large cold deformation on characteristics of age-strengthening of 2024 aluminum alloys[J].Transactions of Nonferrous Metals Society of China,2006(5):1121-1128. |
| [35] | A.L.Ning;Z.Y.Liu;S.M.Zeng .Effect of large cold deformation after solution treatment on precipitation characteristic and deformation strengthening aluminum of 2024and 7A04 alloys[J].Transactions of Nonferrous Metals Society of China,2006,6(04):1341-1347. |
| [36] | Y.J. Huang;Z.G. Chen;Z.Q. Zheng .A conventional thermo-mechanical process of Al-Cu-Mg alloy for increasing ductility while maintaining high strength[J].Scripta materialia,2011(5):382-385. |
| [37] | 费玥,金曼,李晶,邵光杰.固溶后冷变形对6082Al-Mg-Si合金时效析出过程的影响[J].金属热处理,2006(05):68-71. |
| [38] | B.P.Mao;J.P.Li;J.Shen .Effect of thermo-mechanieal heat treatment on microstructure and mechanical property of 2197 Al-Li alloy[J].Advanced Materials Research,2011,284:1621-1625. |
| [39] | Emani, SV;Benedyk, J;Nash, P;Chen, D .Double aging and thermomechanical heat treatment of AA7075 aluminum alloy extrusions[J].Journal of Materials Science,2009(23):6384-6391. |
| [40] | H.S.Yang;A.K.Mukherjee;W.T.Roberts .[J].Journal of Materials Science,1992,27:2515-2524. |
| [41] | H Yoshida .[J].Journal of Japan Institute of Light Metals,1991,41:331-337. |
| [42] | J.A.Wert;L.K.Austin .[J].Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,1988,19A:617-625. |
| [43] | A. Smolej;M. Gnamus;E. Slacek .The influence of the thermomechanical processing and forming parameters on Superplastic behaviour of the 7475 aluminium alloy[J].Journal of Materials Processing Technology,2001(1/3):397-402. |
| [44] | C.C.Bampton;J.A.Wert;M.W.Mahoney .[J].Metallurgical Transactions A,1982,13A:193-198. |
| [45] | Primig, S.;Leitner, H.;Knabl, W.;Lorich, A.;Clemens, H.;Stickler, R..Influence of the heating rate on the recrystallization behavior of molybdenum[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:316-324. |
| [46] | 胡治流,曹乃光,沈燕.LY12铝合金FTMT强化工艺的探讨[J].中国有色金属学报,1995(01):72-75. |
| [47] | S.X.Zhang;Y.P.Zhu;H.H.Wu .Effects of pre-ageing on thermomechanical treatment process of 2A12 aluminum alloy[J].Applied Mechanics and Materials,2012,217:283-287. |
| [48] | M.M.Tash;S.Alkahtani .Effect of thermo-mechanical treatment (TMT) on hardness of heat-treated Al-Mg-Si (6082) alloys:experimental correlation using (DOE) method[J].Applied Mechanics and Materials,2013,376:163-172. |
| [49] | 权力伟,赵刚,Sam GAO,Barry.C.MUDDLE.预拉伸对时效2524铝合金微观组织的影响[J].中国有色金属学报（英文版）,2011(09):1957-1962. |
| [50] | S Singh;D B Goel .Influence of thermomechanical aging on fatigue behaviour of 2014 Al-alloy[J].Bulletin of Materials Science,2005(2):91-96. |
| [51] | 彭北山,宁爱林,蒋寿生,肖似蹼.形变热处理对7A04铝合金组织和性能的影响[J].热加工工艺,2006(18):30-32. |
| [52] | 曹志强,冯亚利,王同敏,李廷举.7050铝合金最终形变热处理工艺优化[J].大连理工大学学报,2012(06):823-828. |
| [53] | D.Wang;Z.Y.Ma;Z.M.Gao .Effects of severe cold rolling on tensile properties and stress corrosion cracking of 7050 aluminum alloy[J].Materials Chemistry and Physics,2009,117:228-233. |
| [54] | A.Deschamps;F.Livet;Y.Brechet .[J].Acta Materialia,1999,47(01):281-292. |
| [55] | Han, N.;Zhang, X.;Liu, S.;Ke, B.;Xin, X. .Effects of pre-stretching and ageing on the strength and fracture toughness of aluminum alloy 7050[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(10/11):3714-3721. |
| [56] | R.E.Sanders Jr .[J].Metallurgical Transactions A,1978,9A:1087-1100. |
| [57] | X.G.Fan;D.M.Jiang;Q.C.Meng .Influence of quench on ageing response and mechanical properties of Al-Zn-Mg-Cu-Zr alloy[J].Transactions of Nonferrous Metals Society of China,2006,16(S):1248-1253. |
| [58] | S.T.Lim;I.S.Eun;S.W.Nam .Control of equilibrium phases (M,T,S) in the modified aluminum alloy 7175 for thick forging applications[J].Materials Transactions,2003,44(01):181-187. |
| [59] | T. Warner .Recently-Developed Aluminum Solutions for Aerospace Applications[J].Materials Science Forum,2006(Pt.2):1271-1278. |
| [60] | Wang Y;Chen M;Zhou F;Ma E .High tensile ductility in a nanostructured metal.[J].Nature,2002(6910):912-915. |
| [61] | D.K. Yang;P.D. Hodgson;C.E. Wen .Simultaneously enhanced strength and ductility of titanium via multimodal grain structure[J].Scripta materialia,2010(9):941-944. |
| [62] | L.An;Y.Cai;W.Liu et al.Effect of pre-deformation on microstructure and mechanical properties of 2219 aluminum alloy sheet by thermomechanical treatment[J].Transactions of Nonferrous Metals Society of China,2012,22(S):370-375. |
| [63] | 尹志民,蒋蓉蓉,李建湘,杨志兵,林勇强.固溶后预冷拉伸变形对时效态HS755合金组织和性能的影响[J].铝加工,2009(06):8-11. |
| [64] | J. Adrien;E. Maire;R. Estevez;J. C. Ehrstrom;T. Warner .Influence of the thermomechanical treatment on the microplastic behaviour of a wrought Al–Zn–Mg–Cu alloy[J].Acta materialia,2004(6):1653-1661. |
| [65] | 周鹏展,钟掘,贺地求.LC52厚板搅拌摩擦焊组织性能分析[J].材料科学与工程学报,2006(03):429-431,435. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%