以Al2O3粉、Al粉和Si粉为主要原料,经高温氮化反应制备β-Sialon材料.研究了TiO2烧结助剂、烧结温度和保温时间对制备β-Sialon材料的影响.结果表明,添加TiO2作烧结助剂,在N2气氛中于1500℃保温5h后烧成的试样耐压强度达到76.94 MPa、体积密度达到2.86 g/cm3;试样以β-Sialon为主晶相,晶粒发育较好,呈棱柱状,直径约为1 μm,长度约为2 μm,且分布比较均匀,提高了材料的强度.
参考文献
[1] | Oyama Y;Kamigaito K .Solid solubility of some oxides in Si3N4[J].Journal of Applied Physics,1971,10(11):1637. |
[2] | Jack K H;Wilson W I .Ceramics based on the Si-Al-O-N and related systems[J].Nature Physical Science,1972,238(80):28. |
[3] | Ekstrom T .Dense single-phase β-Sialon ceramics by glass encapsulated hot isostatic pressing[J].Journal of Materials Science,1989,24(05):1853. |
[4] | Dong P L;Wang X D;Zhang M et al.Thermodynamic study and synthesis of β-SiAlON[J].Sci China Ser E:Techn Sci,2009,52(11):3122. |
[5] | 张宇翠 .鱼雷罐用β-Sialon结合刚玉复合材料的组成、结构和性能研究[D].郑州大学,2012. |
[6] | Pradeilles N;Record M C;Granier D et al.Synthesis of β-Sialon:A combined method using sol-gel and SHS processes[J].Ceramics International,2008,34(05):1189. |
[7] | I. J. DAVIES;T. MINEMURA;N. MIZUTANI;M. AIZAWA;K. ITATANI .Sinterability of β-SiAlON powder prepared by carbothermal reduction and simultaneous nitridation of ultrafine powder in the Al_(2)O_(3)-SiO_(2) system[J].Journal of Materials Science,2001(1):165-172. |
[8] | 刘明,高立春,徐利华,仉小猛,王缓,王体壮.碳热还原氮化法制备β-Sialon粉体的研究[J].人工晶体学报,2008(05):1260-1263. |
[9] | 王体壮,徐利华,钱扬保,刘明,姚云.碳热还原氮化法制备SiAlON陶瓷材料[J].佛山陶瓷,2004(08):33-36. |
[10] | 赵君红,王瑞生.Z=3的β-Sialon陶瓷材料的制备[J].陶瓷,2011(05):15-17. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%