The theoretical evaluating method is given for the drawability of the sheet with normal anisotropy. The general solution on the cracking load of deep-drawing is deduced, which is based on three kinds of hardening curve of materials most in use. The distributions of stress and strain in the deformed region and the drawing force are obtained by the numerical method. The limiting drawing ratio is calculated through computer-aided simulating test. The experiments of deep-drawing to four kinds of sheet metals express that the relative errors between the predictive and the experimental results about the cracking load and the limiting drawing ratio are within 5%. The drawability of common sheet metals can be quantitatively evaluated in precise terms by means of the theory and the method advanced in this paper.
参考文献
| [1] | Z Q Xiong;Z Y Yang .[J].Chin Journal of Mech Eng,2001,37(07):82. |
| [2] | Z Q Xiong .[J].Chin Journal of Eng,2001,37(09):75. |
| [3] | Z. Q. Xiong;L. S. Xie .Study on the theory and application of the energy method for analyzing compressive instability in sheet forming[J].Journal of Materials Processing Technology,2002(1/3):255-260. |
| [4] | B W Senior .[J].Journal of the Mechanics and Physics of Solids,1956,4:235. |
| [5] | T X Yu;W Johnson .[J].International Journal of Mechanical Sciences,1982,24(03):175. |
| [6] | J X Lei .[J].Journal Univ Sci Tech Beijing,1998,5(04):237. |
| [7] | R L Whiteley .[J].ASME Transactions,1960,52(01):145. |
| [8] | Z Deng;H Z Chen .[J].J.Tsinghua Univ,1989,29(02):86. |
| [9] | Z Q Xiong .[J].Journal of Plasma and Fusion Research,1997,4(02):24. |
| [10] | D M Woo .[J].International Journal of Mechanical Sciences,1964,6(02):116. |
| [11] | Bingwen LIANG;Shiguang HU.Theory of ElasticPlastic Stability[M].北京:国防工业出版社,1983:323. |
| [12] | L A Xofman.Principle on Cold-Press[M].北京:机械工业出版社,1957:148. |
| [13] | Yaodong CUI.[M].南京:南京航空航天大学出版社,1984:55. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%