对Ni60镍基自熔合金激光熔覆层和喷焊层的表面形貌、显微组织、硬度和耐腐蚀性能等进行了对比分析.结果表明:激光熔覆层的表面成型性比喷焊层的好;大部分激光熔覆层组织处于非平衡、亚结晶状态,且具有强、韧两相微观结构特征;喷焊层组织中富含碳化物等硬质相;激光熔覆层和喷焊层与基体均能形成冶金结合;喷焊层的平均硬度比激光熔覆层的高,但其分布并不均匀;激光熔覆层的耐腐蚀性能优于喷焊层的.
参考文献
| [1] | 潘邻.激光表面改性技术的现状与展望[J].表面工程资讯,2005(01):5-6. |
| [2] | R. L. Sun;D. Z. Yang;L. X. Guo;S. L. Dong .Microstructure and wear resistance of NiCrBSi laser clad layer on titanium alloy substrate[J].Surface & Coatings Technology,2000(2/3):251-255. |
| [3] | 李明喜,何宜柱,孙国雄.Ni基合金/45#钢宽、窄带熔覆Co基合金的组织[J].中国激光,2003(11):1044-1048. |
| [4] | Zhou SF;Huang YJ;Zeng XY;Hu QW .Microstructure characteristics of Ni-based WC composite coatings by laser induction hybrid rapid cladding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):564-572. |
| [5] | T. Gomez-del Rio;M. A. Garrido;J. E. Fernandez;M. Cadenas;J. Rodriguez .Influence of the deposition techniques on the mechanical properties and microstructure of NiCrBSi coatings[J].Journal of Materials Processing Technology,2008(1/3):304-312. |
| [6] | X.L. Wu;G.N. Chen .Microstructural features of an iron-based laser coating[J].Journal of Materials Science,1999(14):3355-3361. |
| [7] | 余锦.Ni-Cr-B-Si激光熔覆层与H62黄铜基材间显微组织及微区分析[J].光学精密工程,2000(01):26-28. |
| [8] | 孙宜华,李晨辉,熊惟皓,宋武林,游敏.铁基高铬合金激光熔覆层和堆焊层的组织性能对比[J].机械工程材料,2008(01):59-62. |
| [9] | 王新林,石世宏,郑启光.核阀密封面激光熔覆层稀释率控制研究[J].光电子·激光,2003(02):187-190. |
| [10] | R. Gonzalez;M. Cadenas;R. Fernandez;J. L. Cortizo;E. Rodriguez .Wear behaviour of flame sprayed NiCrBSi coating remelted by flame or by laser[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2007(3/4):301-307. |
| [11] | 林凡,张少宗,施瑞鹤.高铬镍不锈钢的腐蚀电化学特性[J].材料保护,2000(03):50-52. |
| [12] | 颜永根,李明喜,张世宏,何宜柱.纳米CeO2对Ni基合金激光熔覆层的组织与耐蚀性的影响[J].中国稀土学报,2007(05):620-624. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%