A high-manganese austenitic steel matrix （Mn13） composite reinforced with TiN ceramic particles was synthesized by means of Vacuum-Evaporation Pattern Casting （V-EPC）. The composite microstructure and interface bonding of TiN/matrix were analyzed utilizing optical microscope （OM） and X-ray diffraction （XRD）. The effects of different volume fraction of TiN on impact wear resistance were evaluated by MLD-10 impact wear test. The results showed that TiN was evenly distributed in composite layer and had a good interface bonding with matrix when the volume fractions of TiN were 27% and 36% respectively. However, cast defects and TiN agglomeration occurred when the TiN volume fraction increased to 48~. Compared with high-manganese austenitic steel （Mnl3）, the im- pact wear resistance of the TiN-reinforced composite is better. In small impact load conditions, composite layer can effectively resist abrasives wear and TiN particles played an important role in determining impact wear resistance of composite layer. In large impact load, the synergistic roles of spalling of TiN particles and the increase of work hardening of Mn13 based material are responsible for impact wear resistance.
参考文献
| [1] | Ashok Kumar Srivastava;Karabi Das .Microstructural and mechanical characterization of in situ TiC and (Ti,W)C-reinforced high manganese austenitic steel matrix composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2009(1/2):1-6. |
| [2] | Ashok Kumar Srivastava;Karabi Das .The abrasive wear resistance of TIC and (Ti,W)C-reinforced Fe-17Mn austenitic steel matrix composites[J].Tribology International,2010(5/6):944-950. |
| [3] | Ashok Kumar Srivastava;Karabi Das .Microstructure and abrasive wear study of (Ti,W)C-reinforced high-manganese austenitic steel matrix composite[J].Materials Letters,2008(24):3947-3950. |
| [4] | Pagounis E;Talvitie M;Lindroos V K .Influence of the Metal/ Ceramic Interface on the Mierosturcture and Mechanical Prop- erties of HIPed Iron-Based Composites[J].Compos Scl Techn- ol,1996,56:1329. |
| [5] | Hua M;Tam H Y;Ma H Y .Patterned PVD TiN Spot Coat- ings on M2 Steel:Tribological Behaviors Under Different Slid- ing Speeds[J].Wear,2006,260:1153. |
| [6] | Hu SB.;Mei Z.;Li ZZ.;Zhang XB.;Tu JP. .Adhesion strength and high temperature wear behaviour of ion plating TiN composite coating with electric brush plating Ni-W interlayer[J].Surface & Coatings Technology,2001(2/3):174-181. |
| [7] | Hedengvist P;Olsson M;Wallen P .How TiN Coatings Im- prove the Performance of High Speed Steel Cutting Tools[J].Surface and Coatings Technology,1990,41:245. |
| [8] | Soliman F A;Abuzeid O A .On the Improvement of the Per- formance of High Speed Steel Turning Tools by TiN Coatings[J].Wear,1987,119:199. |
| [9] | LI Jing-guo;GAO Lian;GUO Jing-kun .Mechanical Properties and Electrical Conductivity of TiN-Al2O3 Nanocomposites[J].Journal of the European Ceramic Society,2003,23:69. |
| [10] | Kaptay G .The Threshold Pressure of Infiltration Into Fibrous Preforms Normal to the Fibres' Axes[J].Compos Sei Tech,2008,68:228. |
| [11] | 刘士亮,曹国平,李广胜,胡庆喜.稀土铸渗法研制盘磨磨片及使用效果[J].中国造纸,2010(09):37-40. |
| [12] | Markus Weiler .An Infiltration Model Based on Flow Varia- bility in Macropores.Development,Sensitivity Analysis and Applications[J].Journal of Hydrology,2005,310:294. |
| [13] | HUANG Xi-gu.Metallurgy of Iron and Steel Principle[M].Beijing:Metalltlrgieal Industry Press,2007 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%