对热-剪切循环条件下Sn-3.5Ag-0.5Cu钎料在Cu和Ni界面上原子扩散和化合物的生长行为进行了研究.结果表明:再流焊后,在Sn-3.5Ag-0.5Cu/Ni界面上形成(CuxNi1-x)6Sn5化合物;热-剪切循环200周次后,(NixCu1-x)Sn3化合物在(CuxNi1-x)6Sn5化合物周围以片状快速长大;而Sn-3.5Ag-0.5Cu/Cu界面从钎焊到热-剪切循环720周次始终只存在Cu6Sn5金属化合物层.随着热-剪切循环周数的增加,(CuxNi1-x)6Sn5和Cu6Sn5化合物形态均从笋状向平面状生长.界面金属间化合物的厚度随循环周数的增加而增加,且生长基本遵循抛物线规律,说明Cu原子的扩散控制了(CuxNi1-x)6Sn5和Cu6Sn5化合物的生长.
参考文献
| [1] | Young-Sun Kim;Keun-Soo Kim;Chi-Won Hwang .Effect of composition and cooling rate on microstructure and tensile properties of Sn-Zn-Bi alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2003(1/2):237-245. |
| [2] | Kyung-Seob Kim.[J].JOURNAL OF ALLOYS AND COMPOUNDS,2004(379):314. |
| [3] | Xin Ma;Fengjiang Wang;Yiyu Qian;Fusahito Yoshida .Development of Cu―Sn intermetallic compound at Pb-free solder/Cu joint interface[J].Materials Letters,2003(22/23):3361-3365. |
| [4] | Tu K N et al.[J].MATERIAL SCIENCE AND ENGINEERING,2001,R34:1. |
| [5] | 戚林 et al.[J].电子工艺技术,2004,25(02):64. |
| [6] | Tu P L;Chan Y C;Lai J K L .[J].IEEE Trans Comp Pack Manufact Technol B,1997,20(01):87. |
| [7] | Ahmed Sharif;M.N. Islam;Y.C. Chan .Interfacial reactions of EGA Sn-3.5 percentAg-0.5 percent Cu and Sn-3.5 percent Ag solders during high-temperature aging with Ni/Au metallization[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2004(3):184-189. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%