采用硬度测试、金相观察、扫描电镜、能谱分析及腐蚀和摩擦实验的方法，研究钪、锆和锶对铸态镍铝青铜的硬度、组织、耐腐蚀性能和摩擦磨损性能的影响。结果表明：与未微合金化铸态镍铝青铜(Cu-8.57Al-5.3Fe-4.6Ni-1.07Mn-0.63Zn)相比，钪、锆和锶复合微合金化铸态镍铝青铜(Cu-9.97Al-5.4Fe-4.52Ni-1.05Mn-0.62Zn-0.045Zr-0.029Sr-0.057Sc)的相组成没有显著变化，都由α相、β相(高温相)和κ相组成，且各相均显著细化，合金硬度从212.1HV提高到240.7HV；由于组织细化，合金内优先发生腐蚀的共析组织(α+κI I相)，其腐蚀通道产生概率降低，从而在3.5%NaCl水溶液中的均匀腐蚀和电化学腐蚀速率分别降低了.2%和17.8%(微合金化后的腐蚀速率分别为0.023 mm/a和0.231 mm/a)；摩擦因数降低了23.4%(微合金化后的摩擦因数为0.0193)。
The effects of scandium, zirconium and strontium on the hardness, microstructures, corrosion resistance and friction-wear properties of nickel-aluminium bronze ingot were investigated by means of hardness measurement, optical microscopy (OM), scanning electron microscopy (SEM), energy spectrum analysis and corrosion and friction experiments. The results show that, compared with the un-micro-alloying nickel-aluminium bronze ingot (Cu-8.57Al-5.3Fe-4.6Ni-1.07Mn-0.63Zn), the micro-alloying nickel-aluminium bronze ingot (Cu-9.97Al-5.4Fe-4.52Ni-1.05Mn-0.62Zn-0.045Zr-0.03Sr- 0.057Sc) has no significant change in the phase composition, which is composed of α-phase,β-phase (high-temperature phase) andκ-phase, and each phase is remarkably refined. The alloy hardness increases from 212.1HV to 240.7HV. The corrosion occurs preferentially in eutectoid region (α-phase+κI I-phase), but the refinement of the eutectoid microstructure reduces the probability of generating the corrosion channel. So, in 3.5%NaCl water solution, the micro-alloying nickel-aluminium bronze ingot presents better corrosion and tribological properties, the uniform corrosion rate and the electrochemical corrosion rate decrease by 5.2%and 17.8%, the corrosion rates of micro-alloying nickel-aluminium bronze are 0.023 mm/a and 0.231 mm/a, and the friction coefficient decreases by 23.4% (friction coefficient is 0.019 3), respectively.
参考文献
| [1] | R. C. Barik;J. A. Wharton;R. J. K. Wood;K. S. Tan;K. R. Stokes .Erosion and erosion-corrosion performance of cast and thermally sprayed nickel-aluminium bronze[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2005(1):230-242. |
| [2] | NI D R;XIAO B L;MA Z Y;QIAO Y X ZHENG Y G .Corrosion properties of friction-stir processed cast NiAl bronze[J].Corrosion Science,2010,52:1610-1617. |
| [3] | 宋德军,孙现龙,许磊,叶景涛,胡伟民.变形镍铝青铜合金的组织研究[J].稀有金属,2008(04):420-424. |
| [4] | 刘平;任凤章;贾淑果.铜合金及其应用[M].北京:化学工业出版社,2007:102-108. |
| [5] | 郭青蔚;王桂生;郭庚辰.常用有色金属二元合金相图集[M].北京:化学工业出版社,2009:68. |
| [6] | 尹登峰,郑子樵,余志明.Sc对Al-Li-Cu-Mg-Ag-Zr合金组织和性能的影响[J].稀有金属材料与工程,2003(09):736-739. |
| [7] | 毛建伟,金头男,徐国富.含钪Al-Cu合金的显微组织[J].中国有色金属学报,2005(06):923-928. |
| [8] | JB/T 7901-1999.金属材料实验室均匀腐蚀全浸试验方法[S]. |
| [9] | Kear G;Barker BD;Stokes K;Walsh FC .Flow influenced electrochemical corrosion of nickel aluminium bronze - Part II. Anodic polarisation and derivation of the mixed potential[J].Journal of Applied Electrochemistry,2004(12):1241-1248. |
| [10] | WHARTON J A;BARIK R C;KEAR G;WOOD R J K STOKES K R WALSH F C .The corrosion of nickel aluminium bronze in seawater[J].Corrosion Science,2005,47:3336-3367. |
| [11] | J. A. Wharton;K. R. Stokes .The influence of nickel-aluminium bronze microstructure and crevice solution on the initiation of crevice corrosion[J].Electrochimica Acta,2008(5):2463-2473. |
| [12] | 张文奇;石声泰;肖纪美.金属腐蚀手册[M].上海:上海科学技术出版社,1987:114-127. |
| [13] | A. Al-Hashem;W. Riad .The role of microstructure of nickel-aluminium-bronze alloy on its cavitation corrosion behavior in natural seawater[J].Materials Characterization,2002(1):37-41. |
| [14] | FONLUPT S;BAYLE B;DELAFOSSE D;HEUZE J L .Role of second phases in the stress corrosion cracking of a nickel-aluminium bronze in saline water[J].Corrosion Science,2005,47:2792-2806. |
| [15] | 徐建林,陈超,喇培清,王智平,李海兰,刘明朗,朱小武.新型铸造铝青铜的润滑摩擦性能[J].中国有色金属学报,2004(06):917-921. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%