The influence of addition of boron (B) on eutectic solidification in a near-eutectic AI-13.0%Si alloy modified with strontium (Sr) was investigated using thermal analysis and macro/microstructure observation. Addition of B in the Sr-modified alloy leads to a considerable increase in nucleation temperature (Tn, the minimum temperature prior to recalescence (TM) and growth temperature (TG). In the Sr-modified alloy, nucleation of eutectic might originate at the heterogeneous sites on the mold wall or in the melt near the wall, and eutectic solidification proceeds gradually towards the center, controlled by undercooling of melt. However, with addition of B in the Sr-modified alloy, undercooling required for eutectic nucleation became small, and hence eutectic solidification might occur almost simultaneously within whole casting, controlled by amount of heterogeneous sites. With excessive addition of B in the Sr-modified alloy, nucleation of eutectic grains was explosive within the whole casting and the power of Sr on eutectic solidification was completely poisoned.
参考文献
| [1] | X F Liu;Y Y Wu;X F Bian .[J].Journal of Alloys and Compounds,2005,391(1-2):90. |
| [2] | H C Liao;Y Sun;G X Sun .[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2002,335(1-2):62. |
| [3] | M.M. Haque;Ahmad F. Ismail .Effect of superheating temperatures on microstructure and properties of strontium modified aluminium-silicon eutectic alloy[J].Journal of Materials Processing Technology,2005(0):312-316. |
| [4] | W. M. Wang;J.-M. Liu;X.-F. Bian;X.-Y. Chen;Z.-G. Liu .Formation of block-like eutectic silicon under direct current in eutectic Al-Si alloy[J].Journal of Materials Science Letters,2002(8):613-615. |
| [5] | H C Liao;G X Sun .[J].Journal of Materials Science and Technology,2004,20(04):521. |
| [6] | M Makhlof;H Guthy .[J].Journal of Light Metals,2001,1:199. |
| [7] | S Shankar;Y Riddle;M Makhlouf .[J].Acta Materialia,2004,52:4447. |
| [8] | A K Dahle;K Nogita;J Zindel;S D McDonald L Hogan .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2001,32:949. |
| [9] | K. Nogita;S. D. McDonald;A. K. Dahle .Solidification mechanisms of unmodified and strontium-modified hypereutectic aluminium-silicon alloys[J].Philosophical magazine: structure and properties of condensed matter,2004(17):1683-1696. |
| [10] | A.K. Dahle;K. Nogita;S.D. McDonald .Eutectic modification and microstructure development in Al-Si Alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(0):243-248. |
| [11] | S D McDonald;K Nogita;A K Dahle .[J].Acta Materialia,2004,52:4273. |
| [12] | K Nogita;S D McDonald;C Dinnis;L Lu,A K Dahle.Eds M G Chu,D A Granger,Qingyou Han.TMS Solidification of Aluminum Alloys[M].The Minerals,Metal & Materials Society,2004:93. |
| [13] | A K Dahle;S D McDonald;K Nogita.[A].Columbus,OH.ASM International,2002:1. |
| [14] | H C Liao;Z P Wu;G M Dong;J Chen G X Sun .[J].Acta Metallurgica Sinica,2005,41(10):1047. |
| [15] | Hengcheng Liao;Min Zhang;Qichang Wu .Refinement of eutectic grains by combined addition of strontium and boron in near-eutectic Al-Si alloys[J].Scripta materialia,2007(12):1121-1124. |
| [16] | H C Liao;H P Wang;M Zhang;G.M.Dong G.X.Sun.MS&T2007 Meeting:Automotive Light Metal Casting,Technology and Applications[M].Detroit,MI USA,2007:469. |
| [17] | J Tamminen .Thermal Analysis for Investigation of Solidification Mechanisms in Metals and Alloys[D].Stockholm University,1988. |
| [18] | S Z Lu;A Hellawell .[J].JOM-Journal of the Minerals Metals and Materials Society,1995,47:38. |
| [19] | D Apelian;J Chen .[J].AFS Transactions,1986,94:797. |
| [20] | L Heusler;W Schneider .[J].Journal of Light Metals,2002,2:17. |
| [21] | H C Liao;G X Sun .[J].Scripta Materialia,2003,48(08):1035. |
| [22] | H C Liao;G X Sun .[J].ACTA METALLURGICA SINICA,2003,39(02):156. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%