对西北有色金属研究院研制的新型Ti-Al-Cr-Mo-W-Fe系β钛合金在α+β相区固溶,经不同条件冷却后初生α相的演变行为进行研究。结果表明:当冷却速率为0.05℃/min时,初生α相为近球形,呈现球状生长的特征,且晶粒尺寸随着冷却时间的延长没有明显增加;当冷却速率为0.005℃/min时,部分初生α相端面出现“叉型”结构定向生长,呈现片层结构特征,α相平均等效直径随冷却时间的延长连续增大,形状因子越来越偏离最初的0.9,不均匀生长越来越加剧。
The primary αphase transformation of Ti-Al-Cr-Mo-W-Fe titanium alloy during different cooling processes within the α+βtwo-phase region was investigated .This new βtitanium alloy was developed by Northwest Institute for Nonferrous Metal Research .The results show that the growth character of primary αphase is globular and the size growth of globular crystals with the cooling time expand is not large when the cooling rate is 0.05 ℃/min.But the growth character of primary αphase is fork type structure and the equivalent diameter with the cooling time expand is large, the shape factor is more deviated from 0.9 and the uneven growth is more intensified when the cooling rate is 0.005 ℃/min.
参考文献
[1] | 樊晓光;杨合;高鹏飞;严思梁.大型TA15钛合金板坯热加工中α相形态演变[J].中国有色金属学报(英文版),2013(12):3508-3516. |
[2] | Tan, Changsheng;Li, Xiangli;Sun, Qiaoyan;Xiao, Lin;Zhao, Yongqing;Sun, Jun.Effect of alpha-phase morphology on low-cycle fatigue behavior of TC21 alloy[J].International Journal of Fatigue,2015:1-9. |
[3] | Zhang, Yaowu;Kent, Damon;Wang, Gui;St John, David;Dargusch, Matthew.Evolution of the microstructure and mechanical properties during fabrication of mini-tubes from a biomedical beta-titanium alloy[J].Journal of the mechanical behavior of biomedical materials,2015:207-218. |
[4] | Cheng-Lin Li;Xu-Jun Mi;Wen-Jun Ye.A study on the microstructures and tensile properties of new beta high strength titanium alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2013:23-30. |
[5] | Yuyong Chen;Zhaoxin Du;Shulong Xiao.Effect of aging heat treatment on microstmcture and tensile properties of a new (3 high strength titanium alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2014:588-592. |
[6] | 林成;尹桂丽;刘志林;赵永庆;吴欢;葛鹏.高强钛合金抗拉强度的理论计算[J].稀有金属材料与工程,2010(7):1189-1194. |
[7] | 贾百芳;杨义;葛鹏;杨冠军.TC18钛合金室温性能与初生α相组织特征的关系研究[J].热加工工艺,2011(14):4-6. |
[8] | 田琴;雷源源;朱涛;王丽.搅拌温度对半固态过共晶铝硅合金中初生硅形貌的影响[J].铸造技术,2012(8):910-912. |
[9] | 杨卯生;赵爱民;毛卫民;钟雪友.60Si2Mn钢半固态初生相形成与演变机制[J].金属学报,2002(7):689-693. |
[10] | 陈勋;范群波;杨学文.TC6钛合金加热和冷却过程中的相转变研究[J].稀有金属材料与工程,2012(12):2123-2126. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%