采用料浆浸渍辅助超声处理工艺成功制备了单向碳纤维增强无机聚合物基复合材料,并在1100 ℃、1200 ℃、1300 ℃和1400 ℃下对其进行高温处理.研究了无机聚合物和复合材料的热稳定性、相演变过程、力学性能变化等.结果表明,经高温处理后复合材料和无机聚合物均完成陶瓷化过程,析出白榴石晶相,并且由于碳纤维和基体之间界面反应的存在,与无机聚合物相比复合材料具有较差的热稳定性.随处理温度的提高,复合材料力学性能先升高再降低,经1200 ℃高温处理后复合材料达到最高的弯曲强度和断裂功,比处理前复合材料分别提高了28%和11%;高温处理后复合材料强度的提高主要是由于基体完成陶瓷化,基体和纤维的界面结合强度提高,界面能够有效传递载荷;随处理温度继续升高,界面反应造成碳纤维损伤严重,并且由于基体和碳纤维热失配形成的残余应力也逐渐升高,二者共同作用造成复合材料性能急剧下降.
参考文献
| [1] | Davidovits J.30 Years of successes and failures in geopolymer applications[A].Australia,2002 |
| [2] | Davidovits J .Geopolymer-inorganic polymeric new materials[J].Journal of Thermal Analysis and Calorimetry,1991,37:1633-1656. |
| [3] | Valeria F. F. Barbosa;Kenneth J. D. MacKenzie .Synthesis and thermal behaviour of potassium sialate geopolymers[J].Materials Letters,2003(9/10):1477-1482. |
| [4] | Kriven W M;Jonathon B;Matthew G .Microstructure and microchemistry of fully-reacted geopolymers and geopolymer matrix composites[EB/OL].http://kriven.mse.uiuc.edu/recent/recent.htm |
| [5] | Douglas C C;Kriven W M .Composite cold ceramic geopolymer in a refractory application[EB/OL].http://kriven.mse.uiuc.edu/recent/recent.htm |
| [6] | Richard E L;Balaguru P N;Andrew F et al.Fire-resistant aluminosilicate composites[J].Fire and Materials,1997,21:67-73. |
| [7] | Valeria F.F.Barbosa;Kenneth J.D.MacKenzie .Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate[J].Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,2003(2):319-331. |
| [8] | Kriven W M;Jonathan B;Matthew G .Geopolymers:alkali bonded ceramics(ABCs)for high-tech applications[EB/OL].http://kriven.mse.uiuc.edu/recent/recent.htm |
| [9] | Duxson P;Lukey GC;van Deventer JSJ .Thermal evolution of metakaolin geopolymers: Part 1 - Physical evolution[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,2006(52/54):5541-5555. |
| [10] | 周亚栋.无机材料物理化学[M].武汉:武汉工业大学出版社,2003 |
| [11] | Wen G W .[D].哈尔滨:哈尔滨工业大学,1996. |
| [12] | See Hoon Lee;Markus Weinmann;Fritz Aldinger .Processing and properties of C/Si-B-C-N fiber-reinforced ceramic matrix composites prepared by precursor impregnation and pyrolysis[J].Acta materialia,2008(7):1529-1538. |
| [13] | Koch D;Tushtev K;Grathwohl G .Ceramic fiber composites:Experimental analysis and modeling of mechanical properties[J].Composites Science and Technology,2008,68:1165-1172. |
| [14] | G.H. Zhou;S.W. Wang;J.K. Guo .The preparation and mechanical properties of the unidirectional carbon fiber reinforced zirconia composite[J].Journal of the European Ceramic Society,2008(4):787-792. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%