The processing parameters of tube extrusion for superalloy Inconel 718 (IN 718), such as slug temperature, tools temperature, choice of lubricant, extrusion ratio and extrusion speed, were determined by experiment in this paper. An appropriate temperature range recommended for the slug is 1080～1120℃, and the temperature range recommended for the tools is 350～500℃. The microstructural evolution of superalloy IN 718 during tube extrusion was analyzed.With the increase of the deformation the cross crystal grains were slightly refined. While the vertical crystal grain is elongated evidently and the tensile strength increased along the axial rake. Glass lubricants have to be spread on the slug surface after being heated to 150～200℃, vegetable oil or animal oil can be used as the lubricant on the surface of the tools to reduce the extrusion force remarkably.
参考文献
| [1] | JunYE.Superalloy of Ferronickel in America[M].北京:科学出版社,1978 |
| [2] | QianraoHUANG;Hankang LI;Superalloy.[M].北京:冶金工业出版社,2000 |
| [3] | ChangxuSHI.Fourth Years of Superalloy in China[M].SciTechnol Press Beijing,1996:197-201134. |
| [4] | JohnFRadavich.[J].Journal of Metals,1988:35. |
| [5] | RoertLGoetz .[J].Journal of Materials Processing Technology,1992,35:37. |
| [6] | KMuller .[J].Journal of Materials Processing Technology,2000,111:122. |
| [7] | TMakiyama;MMurata.Advances in Materials[J].Processing Technologies,2003:1174. |
| [8] | N. R. Chitkara;M. A. Butt .Axisymmetric rod extrusion through smooth and partially rough conical, cosine, and flat-faced circular dies: slip-line field solutions using numerical methods and some experiments[J].The International Journal of Advanced Manufacturing Technology,2003(3):157-176. |
| [9] | K.J. Kim;C.H. Lee;D.Y. Yang .Investigation into the improvement of welding strength in three-dimensional extrusion of tubes using porthole dies[J].Journal of Materials Processing Technology,2002(0):426-431. |
| [10] | CHwang;HILee;WBBae .[J].Journal of Materials Processing Technology,2003,139(1-3):547. |
| [11] | PKazanowski;WZMisiolek;VKSikka .[J].Materials Science Forum,2003,426(04):3795. |
| [12] | N. R. Chitkara;A. Aleem .Extrusion of axi-symmetric tubes from hollow and solid circular billets: a generalised slab method of analysis and some experiments[J].International Journal of Mechanical Sciences,2001(7):1661-1684. |
| [13] | SHHang;YXu;YLShang;KYang ZTWang .[J].Journal of Materials Science and Technology,2001,17(01):113. |
| [14] | XMez;Jecheberria .[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2003,348(1-2):180. |
| [15] | M. Shiraishi;M. Nikawa;Y. Goto .An investigation of the curvature of bars and tubes extruded through inclined dies[J].International Journal of Machine Tools & Manufacture: Design, research and application,2003(15):1571-1578. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%