为了给TRIP钢的试制提供参考,对各种合金元素在TRIP钢中的作用进行了描述,并介绍了热轧和冷轧TRIP钢的处理工艺.认为TRIP钢的研究、生产、应用与双相钢相似,能生产双相钢的生产线即可生产TRIP钢.为生产符合我国国情的TRIP钢,应加强微合金元素钒、钛在TRIP钢中作用的基础研究.
参考文献
[1] | 雷廷权;姚忠凯;杨德庄.钢的形变热处理[M].北京:机械工业出版社,1979 |
[2] | 马鸣图;吴宝榕.双相钢--物理和力学冶金[M].北京:冶金工业出版社,1988 |
[3] | H. K. D. H. BHADESHIA .TRIP-Assisted Steels?[J].ISIJ International,2002(9):1059-1060. |
[4] | 王四根;花先礼;王绪 .低碳硅锰系冷轧相变诱发塑性钢研究[J].钢铁,1995,30(06):48. |
[5] | 王利,金蕾,夏启,徐祖耀.宝钢汽车用冷轧TRIP钢板的开发和应用[C].2003中国钢铁年会论文集,2003:2597-2600. |
[6] | Georg FROMMEYER;Udo BRUX;Peter NEUMANN .Supra-Ductile and High-Strength Manganese-TRIP/TWIP Steels for High Energy Absorption Purposes[J].ISIJ International,2003(3):438-446. |
[7] | 米振莉,唐荻,严玲,郭锦.高强度高塑性TWIP/TRIP钢的开发研究[C].中国金属学会第八届轧钢年会论文集,2004:97-101. |
[8] | 江利,陈涛.相变诱发塑性锚杆材料控冷热处理组织与性能[J].中国矿业大学学报,1999(03):269-272. |
[9] | P. J. JACQUES;E. GIRAULT;A. MERTENS .The Developments of Cold-rolled TRIP-assisted Multiphase Steels. Al-alloyed TRIP-assisted Multiphase Steels[J].ISIJ International,2001(9):1068-1074. |
[10] | Seung Chul BAIK;Seongju KIM;Young Sool JIN .Effects of Alloying Elements on Mechanical Properties and Phase Transformation of Cold Rolled TRIP Steel Sheets[J].ISIJ International,2001(3):290-297. |
[11] | P. J. JACQUES;E. GIRAULT;Ph. HARLET .The Developments of Cold-rolled TRIP-assisted Multiphase Steels. Low Silicon TRIP-assisted Multiphase Steels[J].ISIJ International,2001(9):1061-1067. |
[12] | M. De MEYER .The Influence of the Substitution of Si by Al on the Properties ofCold Rolled C-Mn-Si TRIP Steels[J].ISIJ International,1999(8):813-822. |
[13] | 史文,李麟,周媛,符仁钰,韦习成.Mn含量对0.15C-0.6Si-Mn TRIP钢组织和力学性能的影响[J].金属热处理,2002(08):9-12. |
[14] | Wolfgang Bleck;Andreas Frehn;Joachim Ohlert;侯豁然.铌在双相钢和TRIP钢中的应用[A].北京:冶金工业出版社,2003:456. |
[15] | Hanzaki A Z;Hodgson P D;Yue S .Hot Detormation Cha-racteristics of Si-Mn TRIP Steels With and Without Nb Microalloy Additions[J].ISIJ International,1995,35(03):324. |
[16] | A. Zarei HANZAKI;P. D. HODGSON;S. YUE .The Influence of Bainite on Retained Austenite Characteristics in Si-Mn TRIP Steels[J].ISIJ International,1995(1):79-85. |
[17] | Hashimoto S;Ikeda S;Sugimoto K;Miyake S .Effects of Nb and Mo addition to 0.2%C 1.5%Si 1.5%Mn steel on mechanical properties of hot rolled TRIP-aided steel sheets[J].ISIJ International,2004(9):1590-1598. |
[18] | Y. Chen;X. Chen;Q.F. Wang .EFFECT OF CHEMICAL COMPOSITION ON RETAINED AUSTENITE IN TRIP STEEL[J].Acta metallurgica Sinica,2002(4):339-345. |
[19] | 田蓉,李麟,符仁钰,史文.含钒TRIP钢的组织与力学性能研究[J].金属热处理,2004(06):33-36. |
[20] | Seung Chul BAIK;Sung-Ho PARK;Ohjoon KWON .Effects of nitrogen on the mechanical properties of cold rolled TRIP-aided steel sheets[J].ISIJ International,2006(4):599-605. |
[21] | Sung-Joon KIM;Chang Gil LEE;Tae-Ho LEE .Effects of Copper Addition on Mechanical Properties of 0.15C-1.5Mn-1.5Si TRIP-aided Multiphase Cold-rolled Steel Sheets[J].ISIJ International,2002(12):1452-1456. |
[22] | Chang Gil LEE;Sung-Joon KIM;Tae-Ho LEE .Effects of Tramp Elements on Formability of Low-carbon TRIP-aided Multiphase Cold-rolled Steel Sheets[J].ISIJ International,2004(4):737-743. |
[23] | 冶金工业部钢铁研究院.合金钢手册[M].北京:冶金工业出版社,1972 |
[24] | G. BUZZICHELLI;E. ANELLI .Present Status and Perspectives of European Research in the Field of Advanced Structural Steels[J].ISIJ International,2002(12):1354-1363. |
[25] | A.Z.Hanzaki .Ferrite Formation Characteristics in Si-Mn TRIP Steels[J].ISIJ International,1997(6):583-586. |
[26] | Ichiro Tsukatani;Shun′ichi Hashimoto;Tsuyoshi Inoue .Effects of Silicon and Manganese Addition on MechanicalProperties of High-strength Hot-rolled Sheet Steel Contai-ning Retained Austenite[J].ISIJ International,1991,31(09):992. |
[27] | Kim S.-J.;Lee C.G. .Effects of Coiling Temperature on Microstructure and Mechanical Properties of High-strength Hot-rolled Steel Plates Containing Cu, Cr and Ni[J].ISIJ International,2000(7):692-698. |
[28] | LI Zhuang,ZHANG Ping-li,WU Di.Effects of Austempering after Hot Deformation on the Mechanical Properties of Hot Rolled Si-Mn TRIP Steel Sheets[J].材料热处理学报,2004(05):248-251. |
[29] | Samajdar I.;Verlinden B.;Aernoudt E.;Van Humbeeck J.;Girault E. .Transformations during intercritical annealing of a TRIP-assisted steel[J].ISIJ International,1998(9):998-1006. |
[30] | Chang Gil LEE;Sung-Joon KIM;Chang-Seok OH .Effects of Heat Treatment and Si Addition on the Mechanical Properties of 0.1 wt percent C TRIP-aided Cold-rolled Steels[J].ISIJ International,2002(10):1162-1168. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%