采用脉冲电镀法通过改变平均电流密度和占空比制备了Ni-P合金镀层，利用SEM观察了镀层的表面形貌，用螺旋测微仪测试了镀层的沉积速度，并通过盐水浸泡试验和极化曲线测量考察了镀层的耐蚀性能，以获得最佳的脉冲电镀参数。结果表明：平均电流密度为3A／dm^2、脉宽ton为2ms时，镀层沉积速率较好；占空比为1：5时镀层表面晶粒细化效果较好，表现出优异的耐腐蚀性能。
参考文献
| [1] | Keong K G;Sha W;Malinov S .Crystallisation kinetics and phase transformation behaviour of electroless nickel- phosphorus deposits with high phosphorous content[J].Journal of Alloys and Compounds,2002,334:192-199. |
| [2] | Wang LP;Gao Y;Xu T;Xue QJ .Corrosion resistance and lubricated sliding wear behaviour of novel Ni-P graded alloys as an alternative to hard Cr deposits[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2006(20):7361-7372. |
| [3] | C. J. Lin;K. C. Chen;J. L. He .The cavitation erosion behavior of electroless Ni-P-SiC composite coating[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2006(11/12):1390-1396. |
| [4] | 贾素秋,于淑敏,李铭,布运增.脉冲电镀Ni-Al2O3复合镀层工艺研究[J].汽车工艺与材料,2005(11):1-3,6. |
| [5] | 曹铁华,成旦红,桑付明,袁蓉,徐伟一.脉冲镍磷复合电镀工艺的研究[J].电镀与涂饰,2004(02):13-15. |
| [6] | 蔡羽;陈艳芳;宫方方.阴极电流密度对电镀Ni-W合金镀层质量的影响[J].材料热处理技术,2009(07):97-98. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%