17-4PH沉淀硬化不锈钢经适当的热处理后具有优良的综合性能,常用于石油、化工、航天航空等领域.本工作研究时效温度对17-4PH不锈钢力学性能及在工业废硫酸溶液中腐蚀行为的影响,结果表明:随着时效温度升高,17-4PH不锈钢屈服强度和抗拉强度下降,断面收缩率和延伸率增加;其冲击断口形貌由脆性断裂逐渐过渡为韧性断裂;自腐蚀电位关系为E550℃>E620℃>E580℃.浸泡试验结果表明,经550℃时效处理的17-4PH具有较好耐蚀性能,620℃次之,580℃最差.
参考文献
[1] | S.V. Raj;L.J. Ghosn;B.A. Lerch .Mechanical properties of 17-4PH stainless steel foam panels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):305-316. |
[2] | LI Ping,CAI Qi-zhou,WEI Bo-kang,ZHANG Xian-zhong.Effect of Aging Temperature on Erosion-Corrosion Behavior of 17-4PH Stainless Steels in Dilute Sulphuric Acid Slurry[J].钢铁研究学报(英文版),2006(05):73-78. |
[3] | Esfandiari M;Dong H .The corrosion and corrosion-wear behaviour of plasma nitrided 17-4PH precipitation hardening stainless steel[J].Surface & Coatings Technology,2007(3):466-478. |
[4] | R. L. Liu;M. F. Yan;D. L. Wu .Microstructure and mechanical properties of 17-4PH steel plasma nitrocarburized with and without rare earths addition[J].Journal of Materials Processing Technology,2010(5):784-790. |
[5] | Jun Wang;Hong Zou;Cong Li;Yanhua Peng;Shaoyu Qiu;Baoluo Shen .The microstructure evolution of type 17-4PH stainless steel during long-term aging at 350℃[J].Nuclear engineering and design,2006(24):2531-2536. |
[6] | 黄根良.17-4PH沉淀硬化不锈钢的组织和性能研究[J].钢铁,1998(04):0. |
[7] | 彭艳华,王均,邹红,李聪,黎桂江,沈保罗.17-4PH不锈钢长期时效对拉伸性能的影响[J].核动力工程,2007(03):82-86,89. |
[8] | 赵义,郭亚欢,侯凯.热处理工艺对17-4PH不锈钢力学性能的影响[J].机械工程材料,2009(05):5-8,11. |
[9] | Dong H;Esfandiari A;Li XY .On the microstructure and phase identification of plasma nitrided 17-4PH precipitation hardening stainless steel[J].Surface & Coatings Technology,2008(13):2969-2975. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%