热压罐固化工艺过程中的模具温度分布对于先进复合材料成形质量影响很大。本文在之前相关文献研究的基础上,对模具温度场分布的工艺环境因素作了进一步的研究。结果表明,工艺环境因素中,风速、升降温速率对于模具型面温差影响显著,而模具在罐内的摆放位置则对模具型面温度场温差影响很小。
In autoclave curing process,mould temperature distribution is one of the most important factors for impact manufacturing quality of advanced composites.On the basis of previous researches,this work studied the environmental factors of mould temperature distribution.The result shows that among the technical environmental factors,wind speed,heating rate and cooling rate influence the mould profile temperature difference significantly,while the location of mould placed in the autoclave have rather small influence on the mould profile temperature difference.
参考文献
| [1] | 陈绍杰.浅谈复合材料的整体成型技术[J].高科技纤维与应用,2005(01):6-9,20. |
| [2] | 陈晓春,朱颖心,王元.零方程模型用于空调通风房间气流组织数值模拟的研究[J].暖通空调,2006(08):19-24. |
| [3] | Zhang Cheng;Wang Yonggui;Liang Xianzhu .Research with CFX Software on Frame Mould Temperature Field Simulation in Autoclave Process[J].Polymers & Polymer Composites,2009(5):325-336. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%