针对热声发动机中复杂的起振、消振行为,在自行研制的"驻波型热声发动机试验平台"上,开展了工质类型、加热功率、充气压力等参数对热声发动机起振、消振行为的影响规律研究.试验结果表明:当采用纯氦气和90%氦气+10%氩气的混合气体时,系统存在一最佳的充气压力值,使起振温度和消振温度达到最低;而其余工质,其起振温度与消振温度均随着充气压力增加而逐渐提高;与此同时,由于加热功率对板叠热端温度影响较小,故采用板叠热端温度作为行为特性参数更为合理.
参考文献
| [1] | Rott N .Damped and Thermally Driven Acoustics Oscil-lations in Wide and Narrow Tubes[J].Zeitschrift für angewandte Mathematik und Physik,1969,20(01):230-236. |
| [2] | Rott N .Thermoacoustics[J].Advances in Applied Mechanics,1980,20:135-149. |
| [3] | Swfit G W .Thermoacoustic Engines[J].Journal of the Acoustical Society of America,1988,84(04):1145-1180. |
| [4] | Atchley A A .Analysis of the Initial Build up of Oscilla-tion in a Thermoacoustic Prime Mover[J].Journal of the Acoustical Society of America,1994,95(03):1661-1664. |
| [5] | Atchley A A;Bass H E;Hofler T J et al.Study of a Ther-moacoustic Prime Mover Below Onset of Self-Oscillation[J].Journal of the Acoustical Society of America,1992,91:734-745. |
| [6] | Zhou SL.;Matsubara Y. .Experimental research of thermoacoustic prime mover[J].Cryogenics,1998(8):813-822. |
| [7] | 刘迎文 .脉管制冷机及热声热机的理论与实验研究[D].西安:西安交通大学,2005. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%