综述国外40多年来金属材料超高速刨削研究进展情况。从试验研究和仿真研究两方面总结和分析了速度、材料特性、冲击角度等因素对超高速刨削的影响,重点阐述了刨削冲击形成机理及刨削抑制方法的研究现状。提出了下一步发展方向的建议。
The research progress in hypervelocity gouging of metallic materials aboard in recent 40 years is summarized. The effect of factors including velocity,material characters,impact angle et al,on hypervelocity gouging was analyzed based on experimental and simulative research. Emphasis is laid upon research status of gouging forming mechanism and the method of anti?gouging. Further research plan is put forward.
参考文献
[1] | 吕庆敖,雷彬,李治源,池小平.电磁轨道炮军事应用综述[J].火炮发射与控制学报,2009(01):92-96. |
[2] | Gerstle F P;Follansbee P S;Pearsall G W et al.Thermoplastic shear and fracture of steel during high - velocity sliding[J].WEAR,1973,24(01):97-106. |
[3] | Gerstle F P .Deformation of steel during high velocity unlubri-cated sliding contact[D].Department of Me-chanical Engineering,Duke University,1972. |
[4] | Gerstle F P;Pearsall G W .The stress response of an elastic surface to a high - velocity,unlubricated punch[J].Transac-tions of the ASME,1974,41(04):1036-1040. |
[5] | Barker L M;Trucano T G;Munford J W .Surface gouging by hy-pervelocity sliding contact between metallic material. Sand-ia report SAND87-1328UC-34[R].Sandia National Laboratories,1987. |
[6] | Barker L M;Trucano T G;Munford J W.Surface gouging by hy-pervelocity sliding contact[A].Elsevier Science Publishers,1988:753-756. |
[7] | Barker L.M.;Trucano T.G. .Railgun rail gouging by hypervelocity sliding contact[J].IEEE Transactions on Magnetics,1989(1):83-87. |
[8] | Barker L M;Trucano T G;Susoeff A R .Gun-barrel gouging by sliding metal contact at very high velocities. Sandia Report SAND88-2786[R].Sandia National Laboratories,1988. |
[9] | Gerstle F P .Deformation of steel during high velocity unlubri-cated sliding contact[D].Duke University,1972. |
[10] | Marshall R A.Moving contacts in macro-particle accelerators[A].Australian National University Press,1978:384-386. |
[11] | Krupovage D J;Rasmussen H J .Hypersonic rocket sled devel-opment. Test Track Division,Holloman air force base,Re-port No:AD-TR-82-41[R].,1982. |
[12] | Graff K F;Dettloff B B .The gouging phenomenon between metal surfaces at very high sliding speeds[J].WEAR,1969,14:87-97. |
[13] | Tarcza K R;Weldon W F .Metal gouging at low relative slid-ing velocities[J].WEAR,1997,209:21-30. |
[14] | Barber J P;Bauer D P .Contact phenomena at hypervelocities[J].WEAR,1982,78(1/2):163-169. |
[15] | Barber JR.;Ciavarella M. .Contact mechanics [Review][J].International Journal of Solids and Structures,2000(1/2):29-43. |
[16] | Susoeff A R;Hawke R S .Mechanical bore damage in round bore composite structure railguns. Lawrence Livermore National Laboratory,UCID-21520[R].,1988. |
[17] | Marshall R.A. .Multi-point, packed wire, and monolithic armatures[J].IEEE Transactions on Magnetics,1995(1):209-213. |
[18] | Wolfe T.;Spiegelberg W. .Exploratory metallurgical evaluation of worn rails from a 90 mm electromagnetic railgun[J].IEEE Transactions on Magnetics,1995(1):770-775. |
[19] | Munday D;Jones D G;Mawella K J A.Metallographic studies on rails removed from the DRA electromagnetic launch facili-ty at Kirkcudbright[A].France,1995:91. |
[20] | Persad C.;Prabhu G. .Characterization of hypervelocity gouge craters in rail conductors[J].IEEE Transactions on Magnetics,1997(1):401-405. |
[21] | Stefani F.;Parker J.V. .Experiments to measure gouging threshold velocity for various metals against copper[J].IEEE Transactions on Magnetics,1999(1):312-316. |
[22] | Watt, T.;Motes, D. T. .The Effects of Surface Coatings on the Onset of Rail Gouging[J].IEEE Transactions on Plasma Science,2011(1):168-173. |
[23] | Mixon L C.Assessment of rocket sled slipper wear/gouging phenomena[M].,1997:33-47. |
[24] | Persad C.;Raghunathan S. .Post-test characterization of the hardness and microstructure of copper rails from a 9 MJ electromagnetic launcher[J].IEEE Transactions on Magnetics,1995(1):740-745. |
[25] | Marshall R.A.;Persad C. .Observation of solid armature behavior[J].IEEE Transactions on Magnetics,1995(1):214-218. |
[26] | Boehman L I;Barker J P;Swift H F .Simulation of friction,wear,anti-gouging for hypersonic guider-rail system[R].Ar-nold Engineering Development Center,1977. |
[27] | A. N. Smith;R. L. Ellis;J. S. Bernardes;A. E. Zielinski .Thermal Management and Resistive Rail Heating of a Large-Scale Naval Electromagnetic Launcher[J].IEEE Transactions on Magnetics,2005(1):235-240. |
[28] | Laird D J.Temperature effects on the gouging and mixing of solid metals during hypervelocity sliding impact[A].,2002:1691-1699. |
[29] | Laird D J;Palazotto A N .Effect of temperature on the prog-ress of hypervelocity gouging[J].AIAA,2003,41(11):2252-2260. |
[30] | Graff K F;Dettloff B B .The gouging phenomenon between metal surface at very high sliding speeds[J].WEAR,1969,14(02):87-89. |
[31] | S. Satapathy;C. Persad;R. Monfredo Gee;S. Bless .Gouging Induced Fractures in Tungsten Long Rods[J].International journal of impact engineering,2003(1/10):621-630. |
[32] | Barker L M .Surface gouging by hypervelocity sliding contact[J].IEEE Transactions on Magnetics,1988,25(01):83-87. |
[33] | Tachau R D M .An investigation of gouge initiation in high-ve-locity sliding contact. Sandia National Laboratories Re-port,SAND91-1732-UC-706[R].,1991. |
[34] | Tachau R D M;Yew C H;Trucano T G.Gouge initiation in high - velocity rocket sled testing[A].,1994 |
[35] | Schmitz C;Palazotto A;Hooser M.Numerical investiga-tion of the gouging phenomena within a hypersonic rail-sled assembly[A].,2001:16-19. |
[36] | Laird D J .The investigation of hypervelocity gouging[D].Ohio:Air Force Institute of Technology,2002. |
[37] | Szmerekovsky A G .The physical understanding of the use of coatings to mitigate hypervelocity gouging considering real test sled dimensions[D].Wright-Patterson AFB:AFIT,2004. |
[38] | Cinnamon J D .Analysis and simulation of hypervelocity goug-ing impacts[D].Air Force Institute of Technology,2006. |
[39] | Tarcza K R;Weldon W F .Metal gouging at low relative slid-ing velocities[J].WEAR,1997,209(1/2):21-30. |
[40] | Wang Ying;Marshall R A.Railgun:their science and technol-ogy[M].北京:中国机械出版社,2004:128-129. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%