分析了中厚板轧件常见的板形缺陷问题及其产生的原因,建立了轧件在矫直过程中横向残余应力计算的解析模型并进行了数值求解;建立了3维接触有限元模型并进行了模拟计算,验证了解析法与有限元法计算结果的一致性,以此为基础研究了中厚板矫直横向残余应力的消减趋势、规律和控制策略,研究结果表明：加大压下量有利于减小残余应力,轧件断面的最大塑性百分比控制在70%～80%为宜。
The common defection of the plate was analyzed.Mathematical models of improving the stresses were researched and the process of solving the models was given.The 3D contact element model was built and simulated to check whether the mathematical models were correct or not.There was a good consistency when comparing the residual stress distribution by FEM with analysis models after levelling.The regulation and laws of improving the residual stresses in width direction of the plate were researched and the strategy of controlling residual stress after levelling were proposed based on the mathematical model.The research result shows that the residual stress can be improved well when the roller gap increases and the plastic radio should be controlled between 70% and 80%.
参考文献
| [1] | 冒田省吾 .厚板板孺正技の刃最近の勤向と裸题[J].塑性と加工(日本),1999,456(40):8. |
| [2] | F. D. Fischer;F. G. Rammerstorfer;N. Friedl;W. Wieser .Buckling phenomena related to rolling and levelling of sheet metal[J].International Journal of Mechanical Sciences,2000(10):1887-1910. |
| [3] | Park Kee-Cheo;Hwang Sang-Moo .Development of a Finite Element Analysis Program for Roller Levelling and Applica- tion for Removing Blanking Bow Defects of Thin Steel Sheet[J].ISIJ International,2002,42(09):990. |
| [4] | Yoshida Fusahito;Urabe Masaki.Computer-aided Process Design for the Tension Levelling of Metallic Strips[J].Jour- nal of Materials Processing Technology,1999(89-90):218. |
| [5] | 周存龙,徐静,王国栋,刘相华.中厚板在矫直后的残余应力分布分析[J].重型机械,2005(02):21-24. |
| [6] | 徐李军,李永林,刘立文,张兴中,骆小刚.大圆坯连铸带液芯矫直过程的应力、应变有限元模拟[J].钢铁研究学报,2006(03):10-14. |
| [7] | 王效岗,黄庆学,马勤.中厚板的横向波浪矫直研究[J].中国机械工程,2009(01):95-98. |
| [8] | 薛军安,胡贤磊,刘相华,王国栋.辊式矫直过程弹塑性弯曲数学模型[J].钢铁研究学报,2008(11):33-36. |
| [9] | 薛军安,崔丽,胡贤磊,刘相华.塑性变形率对辊式矫直板材的影响[J].东北大学学报（自然科学版）,2009(05):681-684. |
| [10] | 崔丽 .中厚板辊式矫直过程模型研究[D].东北大学,2009. |
| [11] | 崔甫.矫直原理与矫直机械[M].北京:冶金工业出版社,2005 |
| [12] | 王国栋.板形控制和板形理论[M].北京:冶金工业出版社,1983 |
| [13] | 徐冰,薛军安,丁天军,胡贤磊,刘相华.中厚板辊式矫直仿真软件设计[J].重型机械,2008(05):39-42. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%