碳纤维增强水泥基复合材料(CFRC)是一种新发展起来的、很有潜力的功能材料.丙烯作前驱体,对短碳纤维在高温下(900～1300℃)进行100个小时左右的化学气相浸渍(CVI)表面处理,丙烯在高温下分解,生成热解碳,沉积在碳纤维表面.借助超声波预分散技术及新型分散剂羟乙基纤维素(hydroxyethyl cellulose,HEC)和超细颗粒硅灰的分散作用,实现了CVI处理碳纤维在水泥基体中的均匀分散.HEC水溶液的质量分数控制在1.56～1.77%之间为宜.分别运用扫描电镜法(SEM)、新拌料浆法(FM)、硬化试件电阻率测试法(ERM)及模拟试验法(SE)四种方法评价了CVI处理后短碳纤维的分散性.每种方法均有自身的优缺点和适应环境,四种方法中,模拟试验法(SE)是评价制备CFRC复合材料前期、碳纤维第一步分散的最方便的方法,此法不仅可节约时间和大量的原材料,而且可预测制备CFRC过程中应选择何种分散剂及碳纤维第二步分散的情况.
Short carbon fibers were treated through Chemical Vapor Infiltration (CVI) process at high temperatures between 900 and 1300℃. Propylene was used as precursor and it was decomposed to produce pyrocarbon that was deposited on the surface of carbon fibers. A new dispersant hydroxyethyl cellulose (HEC) was employed to disperse CVI treated carbon fibers in the cement matrix. Its mass fraction lay in between 1.56 and 1.77% in aqueous solution. Four methods of the scanning electron microscopy, the fresh mixture, the electrical resistivity of hardened samples, and the simulation experiment were, respectively, applied to evaluate their dispersion degree. Each method has its own advantages and disadvantages and it therefore catered for different conditions. Of the four evaluation methods, the simulation experiment one was the most convenient way to determine the first-step dispersion state prior to the preparation of carbon-fiber-reinforced cement-based composites and it was helpful for predicting the second-step dispersion state of carbon fibers in the cement matrix because it economized a large quantity of raw materials and time.
参考文献
| [1] | Jian-guo Zhao;Ke-zhi Li;He-jun Li .The influence of thermal gradient on pyrocarbon deposition in carbon/carbon composites during the CVI process[J].Carbon: An International Journal Sponsored by the American Carbon Society,2006(4):786-791. |
| [2] | D.D. L. Chung .Cement reinforced with short carbon fibers: a multifunctional material[J].Composites. B, Engineering,2000(6/7):511-526. |
| [3] | P.W.Chen;D D L Chung .[J].Smart Materials and Structures,1993,2:22-30. |
| [4] | D.D.L Chung .Self-monitoring structural materials[J].Materials Science and Engineering,1998,22(02):57-78. |
| [5] | B.K.Larson;L.T.Drzal;P.Soronaien .[J].Composites,1990,21(03):205-215. |
| [6] | Y.Xu;D.D.L.Chung .Communication Carbon fiber reinforced cement improved by using silane-treated carbon fibers[J].Cement and Concrete Research,1999(5):773-776. |
| [7] | P.W.Chen;X Fu;D D L Chung .Microstructural andmechanical effects of latex,methylcellulose and silica fumeon carbon fiber-reinforced cement[J].ACI Materials Journal,1997,94(02):147-155. |
| [8] | Yuanxia yang .Methods study on dispersion of fibers in CFRC[J].Cement and Concrete Research,2002(5):747-750. |
| [9] | Y.Ohama;M.Ameno;E.Mitshuhiro .[J].Concr Int :Des Constr,1985,7(03):58-62. |
| [10] | Shaffer MSP.;Windle AH.;Fan X. .Dispersion and packing of carbon nanotubes[J].Carbon: An International Journal Sponsored by the American Carbon Society,1998(11):1603-1612. |
| [11] | X.L.Fu;D D L Chung .Degree of dispersion of latexparticles in cement paste,as assessed by electrical resistivitymeasurement[J].Cement and Concrete Research,1996,26(07):985991. |
| [12] | P.S.Mangat;M C Limbachiya .Repair material propertiesfor effective structural application[J].Cement and Concrete Research,1997,27(04):601-617. |
| [13] | N.Muto;H.Yanagida;T.Nakatsuji;M.Sugita,Y.Ohtsuka,Y.Arai .Design of intelligent materials with self-diagnosing function for preventing fatal fracture[J].Smart Materials and Structures,1992,1:324-329. |
| [14] | X.L.Fu;D D L Chung .Self-monitoring of fatiguedamage in carbon fiber-reinforced cement[J].Cement and Concrete Research,1996,26(01):15-20. |
| [15] | C.L.Victor;H O Karthikeyan .Effect of fiber length variation on tensile properties of carbon-fiber cementcomposites[J].Composites Engineering,1994,4(09):947-964. |
| [16] | X.Fu;W.Lu;D D L Chung .Improving the bondstrength between carbon fiber and cement by fiber surfacetreatment and polymer addition to cement mix[J].Cement and Concrete Research,1996,26(07):1007-1012. |
| [17] | X.Fu;D.D.L.Chung .Improving the bond strength ofconcrete to reinforcement by adding methylcellulose toconcrete[J].ACI Materials Journal,1998,95(05):601-608. |
| [18] | H.Zbou;L.D Chen.[J].China Concrete and Cement Products,1992(04):12-13. |
| [19] | V.Ramakrishnan;V.Srinivasan .[J].Indian Concrete Journal,1982,56(12):326-334. |
| [20] | Jingyao Cao;D.D.L. Chung .Carbon fiber reinforced cement mortar improved by using acrylic dispersion as an admixture[J].Cement and Concrete Research,2001(11):1633-1637. |
| [21] | Mohammed Ibrahim;A. S. Al-Gahtani .USE OF SURFACE TREATMENT MATERIALS TO IMPROVE CONCRETE DURABILITY[J].Journal of Materials in Civil Engineering,1999(1):36-40. |
| [22] | Jingyao Cao;D.D.L. Chung .Improving the dispersion of steel fibers in cement mortar by the addition of silane[J].Cement and Concrete Research,2001(2):309-311. |
| [23] | Q.Z.Mao;Y.X.Yang;Z.Q.Li;D.R.Shen .Effect ofadditions on electrical conduction of CFRC[J].Journal of Inorganic Materials,1997,12(03):415-419. |
| [24] | N. Banthia;C. Yan;K. Sakai .Impact Resistance of Fiber Reinforced Concrete at Subnormal Temperatures[J].Cement & concrete composites,1998(5):393-404. |
| [25] | H.Yan;W.Sun .The effect of silica fume and steel fiber on the dynamic mechanical performance of high-strength concrete[J].Cement and Concrete Research,1999(3):423-426. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%