本文基于湿法球磨分散工艺,利用Fluent对纳米CeO2悬浮液的球磨过程进行仿真模拟,提出以球磨罐磨腔内压强作为其分散效果的评价指标,获得球磨转速、填充率以及球料比等工艺参数对磨腔内压强的影响规律.研究表明,球磨机转速在一定范围内变化时,其转速越大,磨球运动愈激烈,磨腔内压强越大；填充率由0变化为1时,磨腔内压强先增大后减小；球料比增大时,磨腔内压强逐渐增大至平稳.同时采用三因素三水平正交试验,通过沉降试验考察球磨工艺参数对纳米CeO2悬浮液分散效果的影响,验证了球磨仿真的正确性.
参考文献
| [1] | 任俊;沈健;卢寿慈.颗粒分散科学与技术[M].北京:化学工业出版社,2005 |
| [2] | Bryan M. Tyson;Rashid K. Abu Al-Rub;Ardavan Yazdanbakhsh;Zachary Grasley .A quantitative method for analyzing the dispersion and agglomeration of nano-particles in composite materials[J].Composites, Part B. Engineering,2011(6):1395-1403. |
| [3] | 刘景富,陈海洪,夏正斌,陈中华,陈剑华.纳米粒子的分散机理、方法及应用进展[J].合成材料老化与应用,2010(02):36-40,60. |
| [4] | 艾云龙,李玲艳,程玉桂,刘长虹.ZrO2（n）/SiC（n）-MoSi2纳米复合陶瓷中纳米颗粒的均匀分散[J].材料科学与工程学报,2005(04):507-511. |
| [5] | 柳振平,黎向锋,左敦稳,王宏宇,孙玉利,江世好.超细CeO2粉体在醇水混合介质中的超声分散行为[J].材料科学与工程学报,2012(05):732-736. |
| [6] | 蔡昭军,施利毅,杭建忠.纳米ATO粉体制备及其悬浮液的分散稳定性[J].材料科学与工程学报,2007(05):755-759. |
| [7] | 陈刚,黎向锋,左敦稳,王宏宇,孙玉利.球磨工艺参数对醇水系纳米CeO2悬浮液稳定性的影响[J].功能材料,2011(z1):43-46. |
| [8] | Matthew J. Metzger;Davi~d Glasser;Brendon Hausberger;Diane Hildebrandt;Benjamin J. Glasser .Use of the attainable region analysis to optimize particle breakage in a ball mill[J].Chemical Engineering Science,2009(17):3766-3777. |
| [9] | Gordana Matijasic;Krunoslav Zizek;Antun Glasnovic .Suspension rheology during wet comminution in planetary ball mill[J].Chemical Engineering Research & Design: Transactions of the Institution of Chemical Engineers,2008(A4):384-389. |
| [10] | 刘宇,万卉,刘丽萍,郭胜,刘牧群.球磨机内单个研磨介质运动的理论分析[J].中国粉体技术,2010(04):61-64. |
| [11] | 宋海明,张宝述,孙红娟.行星式球磨机在加工蛭石粉体中的应用研究[J].矿山机械,2007(04):14-16. |
| [12] | S. Rosenkranz;S. Breitung-Faes;A. Kwade .Experimental investigations and modelling of the ball motion in planetary ball mills[J].Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems,2011(1):224-230. |
| [13] | A. Seyfi Erdem;S. Levent Ergun .The effect of ball size on breakage rate parameter in a pilot scale ball mill[J].Minerals Engineering,2009(7/8):660-664. |
| [14] | Leonard G. Austin;Kesley Julianelli;Alan Sampaio de Souza .Simulation of wet ball milling of iron ore at Carajas, Brazil[J].International Journal of Mineral Processing,2007(1/4):157-171. |
| [15] | 耿兴利,迟毅林,王学军.球磨机磨球尺寸选择对其性能影响的数值仿真研究[J].新技术新工艺,2011(04):58-61. |
| [16] | 吴星刚,苑明哲,于海斌.基于群体平衡的球磨机粉磨过程动态仿真[J].控制工程,2011(03):380-383,387. |
| [17] | 颜景平,易红,史金飞,张志胜,徐金山.行星式球磨机研制及其节能机理[J].东南大学学报（自然科学版）,2008(01):27-31. |
| [18] | Kiangi K. Kiangi;Michael H. Moys .Particle filling and size effects on the ball load behaviour and power in a dry pilot mill: Experimental study[J].Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems,2008(1):79-87. |
| [19] | S.T.Kolaczkowski;R.Chao;S.Awdry .APPLICATION OF A CFD CODE (FLUENT) TO FORMULATE MODELS OF CATALYTIC GAS PHASE REACTIONS IN POROUS CATALYST PELLETS[J].Chemical Engineering Research & Design: Transactions of the Institution of Chemical Engineers,2007(A11):1539-1552. |
| [20] | Lu Sheng-Yong,Mao Qiong-Jing,Peng Zheng,Li Xiao-Dong,Yan Jian-Hua.Simulation of ball motion and energy transfer in a planetary ball mill[J].中国物理B（英文版）,2012(07):566-574. |
| [21] | Kiangi K. Kiangi;Michael H. Moys .Particle filling and size effects on the ball load behaviour and power in a dry pilot mill: Experimental study[J].Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems,2008(1):79-87. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%