以双辊薄带连续铸轧工艺凝固过程为基础，基于金属凝固的基本原理，并运用现代计算机仿真技术建立了双辊薄带连铸凝固过程的异质形核、修正的枝晶尖端生长动力学、柱状晶向等轴晶生长转变（CET）的解析模型以及基于元胞自动机（CA）的双辊薄带连续铸轧凝固组织的仿真模型，为双辊薄带连续铸轧凝固组织形成的仿真模拟奠定了基础，同时利用铝合金双辊薄带连续铸轧组织凝固过程验证了数学模拟的可行性。结果表明：可用建立的数学模型模拟预测铸轧工艺参数对双辊连续铸轧薄带凝固组织的影响。
Based on the solidification of twin-roll continuous casting thin strip, the analytical model of heterogeneous nucleation, the amended growth kinetics of dendrite tip and colunmar to equiaxed transition （CET） of dendrite during twin-roll continuous casting thin strip solidification were established by means of the principle of metal solidification and modern computer emulational technique, and based on cellular automaton, the emulational model of twin-roll continuous casting thin strip solidification was established. The basis for the emulational simulation of twin-roll casting thin strip solidification structure is provided, and the mathematical simulation feasibility is confirmed by experiments. It is found that the established mathematical model is reliable, and it can be used to predict the influence of casting parameters on solidification structure of twin-roll continuous casting thin strip.
参考文献
| [1] | Wang, B.;Zhang, J.Y.;Li, X.M.;Qi, W.H. .Simulation of solidification microstructure in twin-roll casting strip[J].Computational Materials Science,2010(Suppl.1):S135-S139. |
| [2] | YANG Ming-bo;PAN Fu-sheng .Analysis about forming mechanism of equiaxed crystal zone for 1Crl8NigTi stainless steel twin-roll thin strip[J].Journal of Materials Processing Technology,2009,209:2203-2211. |
| [3] | 王波,张捷宇,张胤,贺友多,樊俊飞,方园,安胜利.双辊薄带连铸过程数学物理模拟研究[J].内蒙古科技大学学报,2008(01):67-72. |
| [4] | 张纬栋,任三兵,杜锋,王波,张立,樊俊飞,张捷宇.双辊薄带连铸布流系统研究[J].过程工程学报,2009(z1):102-106. |
| [5] | 张彩东,蒋斌,杨琴,丁培道.M2高速钢工业铸带中共晶碳化物及其演化[J].材料热处理学报,2009(03):107-110. |
| [6] | 王振敏,方圆,齐俊杰,张跃,吴建春.AISI304不锈钢双辊连铸薄带的组织性能[J].材料热处理学报,2007(06):71-74. |
| [7] | KURZ W;GIOVANOLA B;TRIVEDI R .Theory of microstructural development during rapid solidification[J].Acta MetaIl,1986,34(05):823-830. |
| [8] | LEE K;HONG C .Stochastic modeling of solidification grain structure of A1-Cu crystalline ribbons in planar casting[J].ISIJ International,1997,37(01):38-45. |
| [9] | LIU Xiao-bo,XU Qing-yan,JING Tao,LIU Bai-cheng.Microstructure of aluminum twin-roll casting based on Cellular Automation[J].中国有色金属学会会刊（英文版）,2008(04):944-948. |
| [10] | LIU Xiao-bo,XU Qing-yan,JING Tao,LIU Bai-cheng.Simulation of microstructures in solidification of aluminum twin-roll casting based on CA[J].中国有色金属学会会刊（英文版）,2009(02):422-427. |
| [11] | 程挺宇,郑锋,徐少兵.双辊薄带连铸技术研究[J].铸造技术,2009(07):896-898. |
| [12] | ZHAO Hu;LI Pei-jie;HE Liang-ju .Coupled analysis of temperature and flow daring twin-roll casting of magnesium alloy strip[J].Journal of Materials Processing Technology,2011,21 1(06):1197-1202. |
| [13] | Sanjeev Das;N.S. Lim;J.B. Seol;H.W. Kim;C.G. Park .Effect of the rolling speed on microstructural and mechanical properties of aluminum-magnesium alloys prepared by twin roll casting[J].Materials & design,2010(3):1633-1638. |
| [14] | RAPPAZ M.Probabolic Modeling of Microstructure Formation in Solidification Process[J].Acta Metallurgica Et Materialia,1993(02):345-360. |
| [15] | 胡汉起.金属凝固原理[M].北京:机械工业出版社,1991 |
| [16] | TAKATANI M;GANDIN Ch A;RAPPAZ M .EBSD Characterisation and modeling of columnar dendritic grains growing in the resence of fluid flow[J].Aeta Metall,2000,48(03):675-686. |
| [17] | 杨明波,潘复生,彭晓东,丁培道.双辊薄带凝固过程的宏观-微观耦合数学模型[J].重庆大学学报（自然科学版）,2005(05):39-44. |
| [18] | 季晨曦,张炯明,任嵬,王新华.双辊薄带连铸柱状晶组织模拟[J].北京科技大学学报,2008(10):1107-1111,1121. |
| [19] | 李斌 .金属凝固微观组织的数值模拟[D].东北大学,2003. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%