利用热压烧结法制备了钢纤维和硅酸铝纤维混杂增强陶瓷基复合材料,探讨了硅酸铝纤维含量对该复合材料摩擦磨损性能的影响,借助扫描电子显微镜(SEM)观察了复合材料的磨损表面形貌,并分析了其磨损机理.结果表明:随硅酸铝纤维含量的增加,复合材料的摩擦因数增大;高温下复合材料的耐磨性能随硅酸铝纤维含量的增大而降低;未添加硅酸铝纤维复合材料的磨损形式主要表现为脆性脱落和疲劳磨损,并伴有磨粒磨损;添加了硅酸铝纤维的陶瓷基摩擦材料的磨损形式均以粘着磨损为主.
参考文献
[1] | M. Rosso .Ceramic and metal matrix composites: Routes and properties[J].Journal of Materials Processing Technology,2006(1/3):364-375. |
[2] | Amar Patnaik;Mukesh Kumar;Bhabani K. Satapathy;Bharat S. Tomar .Performance sensitivity of hybrid phenolic composites in friction braking: Effect of ceramic and aramid fibre combination[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2010(11/12):891-899. |
[3] | Mukesh Kumar;Jayashree Bijwe .Role of different metallic fillers in non-asbestos organic (NAO) friction composites for controlling sensitivity of coefficient of friction to load and speed[J].Tribology International,2010(5/6):965-974. |
[4] | Sedigheh Bagheri Kazem Abadi;Alireza Khavandi;Yosouf Kharazi .Effects of Mixing the Steel and Carbon Fibers on the Friction and Wear Properties of a PMC Friction Material[J].Applied composite materials,2010(2):151-158. |
[5] | 刘爱萍,付华,刘圣华,许昌玲,任德亮.不锈钢纤维/碳纤维混杂增强聚醚醚酮基摩擦材料的制备与性能[J].机械工程材料,2007(02):36-39. |
[6] | 樊毅.高摩擦力矩值钢纤维增强粉末冶金摩擦材料[J].粉末冶金材料科学与工程,2008(03):177-180. |
[7] | M. Sehmucker;B. Kanka .Temperature-induced fibre/matrix interactions in porous alumino silicate ceramic matrix composites[J].Journal of the European Ceramic Society,2000(14/15):2491-2497. |
[8] | 韩野,田晓峰,尹衍升.硅氧铝陶瓷纤维含量对半金属摩擦材料摩擦磨损性能的影响[J].摩擦学学报,2008(01):63-67. |
[9] | 阎致恒,苏堤.钢纤维与硅氧铝陶瓷纤维对树脂基摩擦材料性能的影响[J].粉末冶金材料科学与工程,2011(01):143-149. |
[10] | 王发辉,刘莹.钢纤维对陶瓷基摩擦材料摩擦学性能的影响[J].摩擦学学报,2012(02):144-149. |
[11] | Pyung Hwang;Xuan Wu .Investigation of temperature and thermal stress in ventilated disc brake based on 3D thermo-mechanical coupling model[J].Journal of Mechanical Science and Technology,2010(1):81-84. |
[12] | 邹军,周元康,丁旭,李国庆,聂华伟.钢纤维和氧化铁粉含量对半金属摩擦材料摩擦磨损性能的影响[J].润滑与密封,2011(01):56-60. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%