以改进V-型褶皱夹芯结构为研究对象,采用模压成型法制备出改进的V-型复合材料褶皱芯子,结合二次粘接工艺将复合材料层合板与褶皱芯子进行复合得到一种新型复合材料褶皱夹芯结构.利用数值模拟与试验相结合的方法,重点考察了该结构在平压载荷作用下的力学响应及其破坏机制.通过引进纤维压溃模型,对该结构的损伤演化过程进行了描述,数值模拟与试验获得的压缩应力-应变曲线吻合较好.实验研究发现,相对密度的变化不仅对该结构的力学性能产生影响,而且将直接导致该结构的破坏模式发生转变.
参考文献
| [1] | 朱亮,肖 毅.拉压性能不同纤维增强复合材料的非线性本构模型[J].复合材料学报,2013,30(3):184-190.Zhu Liang,Xiao Yi.Nonlinear constitutive model for fiber reinforced composites with different properties in tension and compression[J].Acta Materiae Compositae Sinica,2013,30(3):184-190. |
| [2] | 田春雷,皮爱国,黄风雷.CFRP复合材料层合圆筒轴向压缩试验与数值模拟[J].复合材料学报,2013,30(2):159-164.Tian Chunlei,Pi Aiguo,Huang Fenglei.Experimental and numerical study on CFRP tubes under axial crushing[J].Acta Materiae Compositae Sinica,2013,30(2):159-164. |
| [3] | 徐艳华,袁新林.双轴向衬纱纬编玄武岩纤维复合材料弯曲性能[J].复合材料学报,2013,30(2):233-239.Xu Yanhua,Yuan Xinlin.Bending properties of bi-axial weftknitted basalt fiber fabric reinforced composites of different ways of inserted yarn[J].Acta Materiae Compositae Sinica,2013,30(2):233-239. |
| [4] | Heimbs S,Middendorf P,Hampf C,et al.Aircraft sandwich structures with folded core under impact load[C]//8th International Conference on Sandwich Structures,2008,26 (8):369-380. |
| [5] | Mccullough K Y G,Fleck N A,Ashby M F.Uniaxial stress-strain behavior of aluminum alloy foams[J].Cata Mater,1999,47(8):2323-2330. |
| [6] | Gibson L J,Ashby M F.Cellular solids:structures and properties[M].2nd ed.London:Cambridge University Press,1997. |
| [7] | Liu T J,Deng Z C.Bi-functional optimization of cooled,pressurized hollow sandwich cylinders with prismatic core[J].Mesh Phys Solids,2007,55(22):2565-2602. |
| [8] | Evans A G,Hutchinson J W,Fleck N A,et al.The topological design of multifunctional cellular metals[J].Progress in Materials Science,2001,46(3/4):309-327. |
| [9] | Wadley H N G,Fleck N A,Evans A G.Fabrication and structural performance of periodic cellular metal sandwich structures[J].Composite Science and Technology,2003,63(16):2331-2334. |
| [10] | Deshpande V S,Fleck N A,Ashby M F.Effective properties of the octet-truss lattice material[J].Journal of the Mechanics and Physics of Solids,2001,49(8):1747-1769. |
| [11] | Wallach J C,Gibson L J.Mechanical behavior of a three-dimensional truss material[J].International Journal of Solids and Structures,2001,38(41):7181-7196. |
| [12] | Xiong J,Wu L Z,Ma L,et al.Fabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures[J].Composite Structures,2010,92 (11):2695-2702. |
| [13] | Alekseev K A.Geometrical simulation of regular and irregular folded structures[J].Russian Aeronautics(Iz.VUZ),2011,54(1):84-88. |
| [14] | Alekseev K A,Zakirov I M,Karimova G G.Geometrical model of creasing roll for manufacturing line of the wedgeshaped folded cores production[J].Russian Aeronautics (Iz.VUZ),2011,54(1):104-107. |
| [15] | Grzeschik M,Drechsler K.Experimental studies on folded cores[C]//9th International Conference on Sandwich Structures,2010. |
| [16] | Klaus M,Reimerdes H G,Gupta N K.Experimental and numerical investigations of residual strength after impact of sandwich panels[J].International Journal of Impact Engineering,2012,44(2):122-131. |
| [17] | Nguyen M Q,Jacomb S S,Thomson R S,et al.Simulation of impact on sandwich structures[J].Composite Structures,2005,67(2):217-227. |
| [18] | Heimbs S,Cichosz J,Klaus M,et al.Sandwich structures with textile-reinforced composite fold cores under impact loads[J].Composite Structures,2010,92(6):1485-1497. |
| [19] | Kintscher M,Karger L,Wetzel A,et al.Stiffness and failure behavior of folded sandwich cores under combined transverse shear and compression[J].Composites:Part A,2007,38(5):1288-1295. |
| [20] | Fischer S,Heimbes S,Kilchert S,et al.Sandwich structures with folded core:manufacturing and mechanical behavior[C]//SAMPE Europe 30th International Conference,2009:256-263. |
| [21] | 王志瑾,Khaliulin V I.皱褶结构芯格构型的几何设计方法[J].南京航空航天大学学报,2002,34(1):21-26.Wang Zhijin,Khaliulin V I.Geometry design method of folded structure[J].Journal of Nanjing University of Aeronautics and Astronautics,2002,34(1):21-26. |
| [22] | 王志瑾.V-型褶皱夹芯板的隔声性能实验[J].振动工程学报,2006,19(1):45-50.Wang Zhijin.Experimental research on soundproof characteristic for the sandwich plates with folded core[J].Journal of Vibration Engineering,2006,19(1):45-50. |
| [23] | Schenk M,Allwood J M,Guest S D.Cold gas-pressure folding of miura-ori sheets[C]//9th International Conference on Sandwich Structures,2010:130-139. |
| [24] | Xiao J R,Gama B A.Progressive damage and delamination in plain weave S-2 glass/SC-15 composites under quasi-static punch-shear loading[J].Composite Structures,2007,78(2):182-196. |
| [25] | Orifici A C,Herszberg I,Thomson R S.Review of methodologies for composite material modelling incorporating failure[J].Composite Structures,2008,(86):194-210. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%