在250℃以■=0.025min~(-1)测到的Zn-5%Al 合金的超塑性m-δ曲线均属式。w_0/l_0值加大使m_0,m_L 和δ_F 值增大,但对δ_L 和m_F 值无大影响。试样厚度的加大(由1增大到2mm)仅使δ_L 和δ_F 值增大,考虑w_0/l_0比值的影响,C_3~((m_0-m_L))-(m_L=m_(mas))型C.L.m-δ方程式规划为:或其中,m′_0(W_0/l_0)=m_0,m′_0>m_0;m′_L(w_0/l_0)=m_L,m′_L>m。w_0/l_0=0.15—0.39。当w_O/l_0=1时,缺口效应消失,δ(或δ_F)值为最大。
The m-δ curves determined for the Zn-5%Al alloy with T=250℃ and ε=0.025/minwere all of the type.When the w_0/l_0 ratio was increased from 0.15 to 0.39,the m_0,m_L,and δ_F values were increased,while the δ_L and m_F values did not change very clearly.When
参考文献
| [1] | |
| [2] | |
| [3] | |
| [4] | |
| [5] |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%