将亚共晶Zn-Al合金凝固,借助EBSD技术研究了其组织的晶体学特征.结果表明,在样品上部形成了由多个伸长共晶团构成的羽毛状组织,且此共晶团中β和α相存在取向关系{0001}β||{111)α,<1210 >β‖< 110>α.其次,初生β相沉积在样品下部,且其呈扁平枝晶状:六个一次枝晶臂沿< 10i0>方向快速生长而沿<0001>方向则生长缓慢.此外,初生β相内部存在α相析出物,且初生β与此α也存在上述取向关系,但初生β与周围的伪初生α及其附近的共晶β与α之间没有特定取向关系.
参考文献
[1] | ZHANG Yuping,ZHANG Yan,LI Yi,SUN Gang.Friction and wear properties of high-strength Zn-Al alloy,Special Casting & Nonferrous Alloys,(3),5(1996)(张玉平,张琰,李翼,孙钢,高强度锌铝合金摩擦磨损特性的试验研究,特种铸造及有色合金,(3),5(1996)) |
[2] | SUN Lianchao,TIAN Rongzhang,Physical Metallurgy of Zinc and Zinc Alloys,1,(Changsha,Zhongnan Industry University Press,1994) p.5(孙连超,田荣璋,锌及锌合金物理冶金学,1,(长沙,中南工业大学出版社,1994)p.5) |
[3] | WANG Jianhua,WANG Xiande,SU Xuping,TU Hao,Effect of Lanthanum on Microstructure and Mechanical Properties of ZincAluminum Alloy,Foundry,60(2),171 (2011) |
[4] | YANG Liushuan,CHEN Dequan,WANG Hongmin,High Aluminium-Zinc Alloy,l,(Xian,Northwestern Polytechnical University Press,1997) p.1(杨留栓,陈全德,王洪敏,高铝锌合金,1,(西安,西北工业大学出版社,1997) p.1) |
[5] | F Gonzales,M.Rappaz,Dendrite growth directions in aluminumzinc alloys,Metallurgical and Materials Transactions A,37(9),2797(2006) |
[6] | M.Rheme,F.Gonzales,M.Rappaz,Growth directions in directionally solidified Al-Zn and Zn-Al alloys near eutectic composition,Scripta Materialia,59(4),440(2008) |
[7] | F.Gonzales,M.Rappaz,Grain selection and texture evolution in directionally solidified Al-Zn alloys,Metallurgical and Materials Transactions A,39(9),2148(2008) |
[8] | J.Deguercy,M.F.Denanot,M.Fumeron,J.P.Guillot,J.Caisso,Consideration on the precipitation sequence in aluminum zinc alloys,Acta Metallurgica,30(10),1921(1982) |
[9] | M.X.Zhang,E M.Kelly,Understanding the crystallography of the eutectoid microstructure in a Zn-Al alloy using the edge-to-edge matching model,Scripta Materialia,55(7),577(2006) |
[10] | L.Li,Y.D.Zhang,C.Esling,H.X.Jiang,Z.H.Zhao,Y.B.Zuo,J.Z.Cui,Crystallographic features of primary Al3Fe phase,Journal of Applied Crystallography,43(1),1108(2010) |
[11] | L.Li,Y.D.Zhang,C.Esling,H.X.Jiang,Z.H.Zhao,Y.B.Zuo,J.Z.Cui,Crystallographic features of primary AhZr phase,Journal of Crystal Growth,316(1),172(2011) |
[12] | M.Durman,K.Sawalha,S.Murphy,An electron metallographic study of the commercial zinc-based pressure-die-cast alloy 3,Materials Science and Engineering A,130(2),247(1990) |
[13] | L.F.Mondolfo,WANG zhutang,ZHANG Zhenlu,ZHENG Xuan,Aluminum Alloys,Structure and Propenys,(Beijing,Metallurgical Industry Press,1988)P.34(L.F.Mondolfo,王祝堂,张振录,郑旋,铝合金的组织与性能(北京,冶金工业出版社,1988) p.341) |
[14] | A.Semoroz,S.Henry,M.Pappaz,Application of the phase-field method to the solidification of hot-dipped galvanized coatings,Metallurgical and Materials Transactions A,31(2):487(2000) |
[15] | S.T Bluni,M.R.Notis,A.R.Marder,Nucleation characteristics and microstructure in off-eutectic Al-Zn alloys,Acta Metallurgica et Materialia,43(5),1775(1995) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%