使用 X 射线衍射技术研究冷轧变形量和退火温度对 Ni47Ti44Nb9合金一次冷轧和二次冷轧板织构和性能的影响.结果表明,在冷轧变形量小于35%时,一次冷轧板的织构主要为{111}á110?,与热轧态织构不同,随冷轧变形量的增加,织构取向密度略有提高;二次冷轧板主要织构为{111}á110?,在á110?//RD取向线上从{111}á110?延伸到{110}á110?,二次冷轧使织构取向密度获得较大提高.当二次冷轧板材在高于500℃退火时,其主要织构为{111}á112?再结晶织构,700℃、60 min炉冷样品织构的取向密度明显高于相同制度下水淬样品织构的取向密度.
@@@@The effects of the cold rolling reduction and annealing temperature on the texture and properties of Ni47Ti44Nb9 first and secondary cold-rolled plate were investigated by using XRD method. The results show that the major texture of the first cold-rolled plate is{111}á110? that is different from the hot-rolled texture and the orientation density increases slightly with increase of cold reduction when the cold reduction is less than 35%. The orientation density of the secondary cold-rolled plate is greatly enhanced and the major texture is {111}á110? and spreads from{111}á110? to {110}á110? in a á110?//RD fiber. When the annealing temperature of the secondary cold-rolled plate is above 500℃the major texture is{111}á112? recrystallization texture. The orientation density is obviously higher in the secondary cold-rolled plate after furnace cooling at 700℃for 60 min than that of water quenching texture.
参考文献
| [1] | Jan Van Humbeeck .Non-medical applications of shape memory alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(0):134-148. |
| [2] | T. Duerig;A. Pelton;D. Stockel .An overview of nitinol medical applications[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(0):149-160. |
| [3] | 赵连城;蔡伟;郑玉峰.合金的形状记忆效应与超弹性[M].北京:国防工业出版社,2002:243. |
| [4] | 杨冠军,邓炬.Ti-Ni-Nb宽滞后记忆合金的研究进展[J].稀有金属材料与工程,1998(06):322. |
| [5] | SIMPON J A;MELTON K;DUERIG T .Method of processing a nickel/titanium-based shape memory alloy and article produced therefrom[P].US,4631094,1986-12-23. |
| [6] | SUBURI T;YOSHIDA M;NEMMO S .Deformation behavior of shape memory Ti-Ni alloy crystals[J].Scripta Metallurgy,1984,18:363-366. |
| [7] | MIYAZAKI S;KIMURA S;OTSUKA K;SUZUKI Y .The habit plane and transformation strains associated with the martensitic transformation in Ti-Ni single crystals[J].Scripta Metallurgy,1984,18:883-888. |
| [8] | H. INOUE;N. MIWA;N. INAKAZU .TEXTURE AND SHAPE MEMORY STRAIN IN TiNi ALLOY SHEETS[J].Acta materialia,1996(12):4825-4834. |
| [9] | Miyazaki S.;Kitamura K.;Khantachawana A.;Hosoda H.;No VH. .Texture of Ti-Ni rolled thin plates and sputter-deposited thin films[J].International Journal of Plasticity,2000(10/11):1135-1154. |
| [10] | LI D Y;WU X F;KO T .The texture of Ti-51.5 at.%Ni rolling plate and its effect on the all-around shape memory effect[J].Acta Metallurgica Materialia,1990,38(01):19-24. |
| [11] | 颜莹,金伟,曹名洲.Ni47Ti44Nb9形状记忆合金冷轧管材的组织、织构和相变[J].金属学报,2008(02):139-144. |
| [12] | 颜莹,金伟.再结晶对Ni47Ti44Nb9形状记忆合金棒相变和织构的影响[J].稀有金属,2008(04):404-408. |
| [13] | 杨冠军,谢丽英,胡文英.再结晶退火对Ni47Ti44Nb9合金冷轧板相组成及板材织构的影响[J].稀有金属材料与工程,1994(03):13-16. |
| [14] | Yang, Guanjun;Xie, Liying;Hu, Wenying;Deng, Ju;Hao, Shiming .EFFECT OF ANNEALING TEMPERATURE ON TEXTURE OF COLD-ROLLED Ni_(47)Ti_(44)Nb_9 SHEET[J].Transactions of Nonferrous Metals Society of China,1995(1):88-93. |
| [15] | 颜莹,金伟,周亭俊.热轧Ni47Ti44Nb9形状记忆合金板材的织构及其对拉伸和恢复性能的影响[J].中国有色金属学报,2010(11):2148-2153. |
| [16] | 颜莹,金伟,王健,周亭俊.Ni47Ti44Nb9形状记忆合金轧制板材的织构、相变和性能[J].中国有色金属学报,2010(z1):483-486. |
| [17] | INAGAKI H .Fundamental aspect of texture formation in low carbon steel[J].ISIJ International,1994,34(04):313-321. |
| [18] | RAY R K;JONAS J J;HOOK R E .Cold rolling and annealing textures in low carbon and extra low carbon steels[J].International Materials Reviews,1994,39:129-172. |
| [19] | Yasunobu NAGATAKI;Yoshihiro HOSOYA .Origin of the Recrystallization Texture Formation in an Interstitial Free Steel[J].ISIJ International,1996(4):451-460. |
| [20] | 杨平,李志超,毛卫民,赵子苏.钢中{111}〈112〉再结晶织构的形成[J].材料热处理学报,2009(03):46-52. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%