利用有限元模拟和实验验证研究了拉伸载荷下C/SiC铆接接头的应力分布及几何参数与破坏方式的固有关系.结果表明:接头的锥度变化对接头中的应力分布影响不大,但对应力值的影响较为明显,锥度控制在2°～10°比较合适.模拟计算的铆钉临界半径为2.2016 mm,小于2.2016 mm时,铆钉被拉断,反之,铆钉被拔出.实验得到的临界半径为2.25 mm,与计算结果的误差为2.2％,说明提出的铆接接头几何结构参数与接头破坏形式关系的模型是正确的.
参考文献
| [1] | 张立同,成来飞,徐永东.新型碳化硅陶瓷基复合材料的研究进展[J].航空制造技术,2003(1):23-32.Zhang Litong,Cheng Laifei,Xu Yongdong.Progress in research work of new CMC-SiC[J].Aeronautical Manufacturing Technology,2003(1):23-32. |
| [2] | Raman V,Bhatia G,Mishra A,et al.Development of carbon-ceramic composites[J].Materials Science and Engineering A,2005,412(1/2):31-36. |
| [3] | 任德亮,齐海波,丁占来,等.SiC颗粒增强铝基复合材料的焊接[J].焊接技术,1999(3):10-12.Ren Deliang,Qi Haibo,Ding Zhanlai,et al.Welding of SiC particulate reinforced aluminum matrix composites[J].Welding Technology,1999(3):10-12. |
| [4] | 邹贵生,吴爱萍,任家烈,等.耐高温陶瓷-金属连接研究的现状及发展[J].中国机械工程,1999(3):330-332.Zou Guisheng,Wu Aiping,Ren Jialie,et al.Development of ceramic-metal bonding for heat resistant application[J].China Mechanical Engineering,1999(3):330-332. |
| [5] | Nicholas M G,Peteves S D.Reactive joining:Chemical effects on the formation and properties of brazed and diffusion bonded interfaces[J].Scripta Material,1994,31(8):1091-1096. |
| [6] | Loehman R E.Recent progress in ceramic joining[J].Key Engineering Material,1999,161-163:657-662. |
| [7] | Santella M L.A Review of techniques for joining advanced ceramics[J].American Ceramic Society Bulletin,1992,71(6):947-954. |
| [8] | Cawley J D.Joining of ceramic-matrix composites[J].American Ceramic Society Bulletin,1989,68(9):1619-1623. |
| [9] | Salvo M,Lemoine P,Ferrarix M,et al.Joining of carbon-carbon composites for thermonuclear fusion applications[J].Journal of the American Ceramic Society,1997,80(1):206-212. |
| [10] | Bates C H,Foley M R,Rossi G A.Joining of non-oxide ceramics for high temperature applications[J].American Ceramic Society Bulletin,1990,69(3):350-356. |
| [11] | Ouddane M,Boukhili R.Proposal for a torsion shear fixture for bonded joints[J].Journal of Material Science,1999,34:2719-2727. |
| [12] | Dano M L,Gendron G,Picard A.Stress and failure analysis of mechanically fastened joints in composite laminates[J].Composite Structures,2000,50(3):287-296. |
| [13] | Kang S,Dunn E M.Issure in ceramic to-metal joining:An investigation of brazing a silicon nitride-based ceramic to a low-expansion superalloy[J].American Ceramic Society Bulletin,1989,68(9):1608-1517. |
| [14] | 汪清.C/SiC复合材料连接接头应力与破坏形式数值分析[D].西安:西北工业大学,2005.Wang Qing.Numerical analysis of residual stress and fracture forms in C/SiC composite joints[D].Xi' an Northwestern Polytechnical University,2005. |
| [15] | 柯晴青,成来飞,童巧英,等.二维C/SiC复合材料的铆接显微结构与性能研究[J].稀有金属材料与工程,2006,35(9):1497-1500.Ke Qingqing,Cheng Laifei,Tong Qiaoying,et al.Microstructure and properties of joints of 2D C/SiC composites by riveting[J].Rare Metal Materials and Engineering,2006,35(9):1497-1500. |
| [16] | 张立同.纤维增韧碳化硅陶瓷复合材料——模拟、表征与设计[M].北京:化学工业出版社,2009.Zhang Litong.Fiber-reinforced silicon carbide ceramic composites-Modeling,characterization and design[M].Beijing:Chemical Industry Press,2009. |
| [17] | 东南大学、西安交通大学.理论力学[M].北京:人民教育出版社,1979.Southeast University,Xi' an Jiaotong University.Theoretical mechanics[M].Beijing:The people's Education Press,1979. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%