研究了分散剂添加量、固相体积分数、研磨时间及复合粉体组成对á-Al2O3/ZrO2(3Y)复相陶瓷悬浮体流变性能的影响.结果表明:当pH值在9.0左右,分散剂添加量为1.20wt%时,á-Al2O3/ZrO2(3Y)(30wt%ZrO2)悬浮体的粘度和剪切应力值较低,悬浮体的粘度和剪切应力值随固相体积分数和ZrO2含量增加而增加,当ZrO2含量较高时,适当调整分散剂添加量,仍可制备流变性较好的悬浮体.在本实验条件下,研磨4h的悬浮体的流变性最佳.
参考文献
| [1] | Janney M A .Methed for molding ceramic powders[P].US 4894194,1990-01-16. |
| [2] | Young A C;Omatete O O;JANNEY M A et al.Gelcastingof alumina[J].Journal of the American Ceramic Society,1991,74(03):612-618. |
| [3] | Graule T J;Baader F H;Gauckler L J .Shaping of ceramicgreen compacts direct from suspensions by enzyme catalyzedreaction[J].cfi/Ber DKG,1994,71:317-321. |
| [4] | 王浚,高濂.高固含量Y-TZP悬浮液的流变学特性[J].无机材料学报,1999(04):651. |
| [5] | 周丽敏,郭露村.分散剂对超细α-Al2O3浆料流变性的影响[J].硅酸盐学报,2003(11):1075-1079. |
| [6] | Wang XL;Guo LC .Effect of preparation methods on rheological properties of Al2O3/ZrO2 suspensions[J].Colloids and Surfaces, A. Physicochemical and Engineering Aspects,2006(1/3):171-176. |
| [7] | 刘晓光,李国军,仝建峰,陈大明.8%Y2O3-ZrO2水基料浆的流变性质研究[J].硅酸盐学报,2003(10):923-927. |
| [8] | 姚义俊,丘泰.氮化铝基板流延成型浆料的研究[J].材料科学与工程学报,2006(03):423-425. |
| [9] | Liu Xiaolin;Huang Yong;YANG Jinlong .Effect ofrheological properties of the suspension on the mechanicalstrength of Al2O3-ZrO2 composites prepared by gelcasting[J].Ceramics International,2002,28s:159-164. |
| [10] | 张灿英,戚凭,李镇江.氧化铝基陶瓷凝胶注模成型工艺的研究[J].无机材料学报,1999(04):623. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%