The strip temperature is affected by many factors in rapid cooling section (RCS) of the vertical continuous annealing furnace (VCAF). They can he divided into four types: the physical properties of cooling gas, the geometry characteristics of configuration of cooling equipment, the heat transfer between the strip and the cooling gas, and the conductivity of the strip. It aims to model the strip temperature in the cooling section based on the fundamental heat transfer theory and the four aspects factors. The model for transient Nusselt number is obtained by considering Reynolds number, Prandtl number and geometry characteristics of RCS. Then cooling model of the strip transient temperature is built by Nusselt number, heat transfer coefficient and heat conductivity of the strip. The results are compared with the data from production line. The comparisons indicate that the model can well predict cooling temperature of the strip. It is hoped that the proposed model can be used for design and control of the vertical continuous annealing furnace.
参考文献
| [1] | XIANG Shumhua;LIU Hua-fei;WEN Hong-quan.Cooling Speed of Strip Temperature by Gas Jet Impinging With H2[A].Beijing:The Chinese Society for Metals,2005:421. |
| [2] | WANG Yong-ping;BAO Ji;GAO Li .Development and Actu alities on Cooling Technologies for Continuous Annealing Fur nace[J].Industrial Furnace,2002,24(01):21. |
| [3] | Incropera F P;Dewitt D P;Bergman T L.Fundamentals of Heat and Mass Transfer[M].北京:化学工业出版社,2009 |
| [4] | ZHU Guang-jun;SUN Y~qin.Transport Principal[M].Bei-jing:Metallurgical Industry Press,2009 |
| [5] | Abdlmonem H B;Michel A S .Effects of Surface Roughness on the Average Heat Transfer of an Impinging Air Jet[J].In ternational Communication in Heat Mass Transfer,2000,27(01):1. |
| [6] | Lee J;Lee S J.The Effect of Nozzle Aspect Ratio on Stagna tion Region Heat Transfer Characteristics of Elliptic Impinging Jet[J].International Journal of Heat and Mass Transfer,2000:555. |
| [7] | WANG Hou-hua;ZHOU Gen-ming;JI Xin-yu.Funda-mentals of Heat Transfer[M].Chongqing:Chongqing Uni-versity Press,2006 |
| [8] | J1A Li di;Li Feng .Process Analysis for Heat Transfer in Rapid Cooling Section of Vertical Continuous Annealing Fur-nace on Hot Dip Galvanizing[J].Energy for Metallurgical In-dustry,2007,26(03):34. |
| [9] | XU Jing-lei;XU Zhong;XIAO Min et al.Numriary for Ana-lyzing Jet Impinging[J].Mechanical Engineering,2007,21(06):8. |
| [10] | Fuchs L;Hallqvist T.Numerical Study of Impinging Jets With Heat Transfer Inlet Conditions Effects[A].Orlando:[s.n.],2009:1578. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%