分析测试H13钢表面镀铬层的表面形貌与结构、粗糙度、显微硬度、厚度、电化学阻抗及极化曲线,研究了H13钢基体表面粗糙度Ra对其表面镀铬层结构与性能的影响.结果表明:电镀时间小于30 min时,随着Ra的增加,镀铬层晶粒尺寸减小,堆积趋于稀疏;电镀30 min后,不同Ra的镀铬层晶粒尺寸及分布基本相同;电镀60 min后,随着Ra的增加,镀铬层晶粒的尺寸明显增大;当Ra值小于0.504 μm时,(200)面为铬晶粒的优势生长面,当Ra值为0.504 μm时,(211)面为铬晶粒的优势生长面;随电镀时间的增加,镀铬层的厚度和显微硬度逐渐增大;当电镀时间相同时,随着Ra的减少,镀铬层的厚度减少,显微硬度增加,镀铬层的耐蚀性逐渐提高.
参考文献
[1] | Shahram Kheirandish,Ahmad Noorian,Effect of niobium on microstructure of cast aisi h13 hot work tool-steel,Journal of Iron and Steel Research,15,61(2008) |
[2] | Jae Ho LEE,Jeong Hwan JANG,Byeong Don JOO,Young Myung SON,Young Hoon MOON,Laser surface hardening of AISI H13 tool steel,Transactions of Nonferrous Metals Society of China,19,917(2009) |
[3] | E.Rodriguez,M.Flores,A.Perez,R.D.Mercado-Solis,R.Gonzalez,J.Rodriguez,S.Valtierra,Erosive wear by silica sand on AISI H13 and 4140 steels,Wear,26,2109(2009) |
[4] | R.L.O.Basso,R.J.Candal,C.A.Figueroa,D.Wisnivesky,F.Alvarez,Influence of microstructure on the corrosion behavior of nitrocarburized AISI H13 tool steel obtained by pulsed DC plasma,Surface and Coatings Technology,203,1293(2009) |
[5] | R.M.Oliveira,J.A.N.Goncalves,M.Ueda,S.Oswald,S.C.Baldiseera,Improved corrosion resistance of tool steel H13 by means of cadmium ion implantation and deposition,Surface and Coatings Technology,204,2981(2010) |
[6] | A.Rojo,J.Oseguera,O.Salas,J.A.Acosta,Process structure properties relationship during formation of CrN and AIN layers on H13 Steel,Surface and Coatings Technology,203,217(2008) |
[7] | Boris Navineek,Peter Panjan,Frank Gorenjak,Improvement of hot forging manufacturing with PVD and DUPLEX coatings,Surface and Coatings Technology,137,255(2001) |
[8] | J.Torres-Gonzalez,P.Benaben,Study of the influence of electrolyte chemical composition on the properties of chromium electrodeposita-microstructure,crystallographic texture,residual stress,and microhardness,Metal Finishing,101,107(2003) |
[9] | D.Kim,M.Kim,K.S.Nam,D.Chang,S.C.Kwon,Duplex coating for improvement of corrosion resistance in chromium deposit,Surface and Coatings Technology,169-170,650(2003) |
[10] | M.Heydarzadeh Sohi,F.Ghadami,Comparative tribological study of air plasma sprayed WC-12%Co coating versus conventional hard chromium electrodeposit,Tribology International,43,882(2010) |
[11] | ZHANG Yuncheng,HU Runan,XIANG Rong,Plating Manual (third edition) (Beijing,National Defense Industry Press,2008) p.246 (张允成,胡如南,向荣,电镀手册(第三版)(北京,国防工业出版社,2008)P.246) |
[12] | An Maozhong,Plating Theory and Technology (Haerbin,Harbin Institute of Technology Press,2004) p.76 (安茂忠,电镀理论与技术,(哈尔滨,哈尔滨工业大学出版社,2004)P.76) |
[13] | ZHANG Hongxiang,WANG Wei,Plating Technology (Tianjing,Tianjin Science and Technology Press,2002)p.185 (张宏祥,王为,电镀工艺学(天津,天津科学技术出版社,2002)P.185) |
[14] | ZHA Quanxing,Kinetics of Electrode Processes (Beijing,Science Press,2002) p.213 (查全性,电极过程动力学导论(北京,科学出版社,2002)P.213) |
[15] | CAO Chunan,Principles of Electrochemical Corrosion (Beijing,Chemical Industry Press,2004) p.169 (曹楚南,电化学腐蚀原理(北京,化学工业出版社,2004)P.169) |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%