欢迎登录材料期刊网

材料期刊网

高级检索

采用声发射技术对扭转加载作用下金属/玻璃纤维复合材料柱壳试件的破坏损伤全过程进行实时监测,通过实验方法与数值分析共同研究螺栓以及壳体尺寸对柱壳试件胶接接头损伤破坏的扭转特性及其声发射响应特征的影响.结果表明,柱壳试件的扭转加载曲线基本表现为线性,主要的失效模式为内聚破坏且伴随着纤维断裂和基体开裂.增大螺栓直径,能有效增强金属/玻璃纤维复合材料柱壳的抗扭性能.柱壳试件的损伤破坏与其声发射信号的相关参数相对应,较大螺栓直径的柱壳试件损伤破坏对应着较高的声发射幅度、相对能量、持续时间和较多的撞击累计数.因此,可将声发射信号的动态变化特征作为风电叶片叶根结构安全评估的重要依据.

参考文献

[1] Fischman D L;Leon M B;Baim D S .A randomized comparison of coronarystent placement and balloon angioplasty in the treatment of coronary artery disease[J].New England Journal of Medicine,1994,331(8):496-501.
[2] Povl Brondsted;Hans Lilholt;Aage Lystrup .Composite Materials for Wind Power Turbine Blades[J].Annual review of materials research,2005(0):505-538.
[3] G.M. Joselin Herbert;S. Iniyan;E. Sreevalsan;S. Rajapandian .A review of wind energy technologies[J].Renewable & sustainable energy reviews,2007(6):1117-1145.
[4] 吴胜军,史俊虎,裴鹏宇.风电叶片叶根连接方式概述[J].玻璃钢/复合材料,2014(7):85-87.
[5] 孙鹏文,邓海龙,张兰挺,王慧敏.1.5MW风机叶片根部连接结构强度分析[J].机械设计与制造,2013(05):207-209.
[6] Budzik, M.K.;Jumel, J.;Shanahan, M.E.R..On the crack front curvature in bonded joints[J].Theoretical and Applied Fracture Mechanics,2012:8-20.
[7] 王孝慧,姚卫星.复合材料胶接结构有限元分析方法研究进展[J].力学进展,2012(05):562-571.
[8] Kwang-Soo Kim;Yeong-Moo Yi;Gwang-Rae Cho;Chun-Gon Kim .Failure prediction and strength improvement of uni-directional composite single lap bonded joints[J].Composite structures,2008(4):513-520.
[9] Wei Xu;Yueguang Wei.Strength and interface failure mechanism of adhesive joints[J].International Journal of Adhesion & Adhesives,2012:80-92.
[10] 郭霞,关志东,刘遂,孔娇月,晏冬秀,乔柳平.搭接长度对复合材料单搭接胶接接头的影响[J].科技导报,2013(07):37-41.
[11] RAMIN HOSSEINZADEH;KHALED SHAHIN;FARID TAHERI .A simple approach for characterizing the performance of metallic tubular adhesively-bonded joints under torsion loading[J].Journal of Adhesion Science and Technology: The International Journal of Theoredtical and Basic Aspects of Adhesion Science and Its Applications in All Areas of Technology,2007(16):1613-1631.
[12] Beatite AG .Acoustic emission-Principles and instrumentation[J].Journal of Acoustic Emission,1983,29:5-128.
[13] 胡绍海;张树京 .胶接结构的声发射检测[J].无损检测,1994,16(6):154-156,163.
[14] Fabio Matta;Piervincenzo Rizzo;Vistasp M. Karbhari;Francesco Lanza di Scalea .Acoustic Emission Damage Assessment of Steel/CFRP Bonds for Rehabilitation[J].Journal of composites for construction,2006(3):265-274.
[15] Dimitrios Zarouchas;Danny van Hemelrijck .Mechanical characterization and damage assessment of thick adhesives for wind turbine blades using acoustic emission and digital image correlation techniques[J].Journal of Adhesion Science and Technology: The International Journal of Theoredtical and Basic Aspects of Adhesion Science and Its Applications in All Areas of Technology,2014(14/15):1500-1516.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%