针对氩气泡在板坯连铸结晶器中的运动行为,以190mm×1900mm板坯连铸结晶器原型为研究对象,采用水力学模型及数值模拟的方法,重点研究了拉速为1.7m/min时不同水口吹气量对结品器内气泡大小、气泡分布、液面波动、渣-金行为等的影响.研究结果表明:随着水口吹气最增加,气泡尺寸逐渐增加,结晶器窄边气泡数量不断减少,气泡大都聚集在水口附近上浮,水口吹气量足引起乳化卷渣、水口附近液面裸露及卷渣等的主要因素.
参考文献
[1] | Thomas B G;Alex Dennisov;Hua Bai.Behavior of Argon Bubbles During Continuous Casting of Steel[A].Illinois:University of Illinois,1997:375. |
[2] | R. SANCHEZ-PEREZ;R. D. MORALES;M. DIAZ-CRUZ .A Physical Model for the Two-phase Flow in a Continuous Casting Mold[J].ISIJ International,2003(5):637-646. |
[3] | Bai H;Thomas B G .Effect of Operation Conditions and Nozzle Design[J].Metallurgical and Materials Trans B,2001,32B:1143. |
[4] | 柳绮年;周有预;方治家 .塞棒吹气时方坯结晶器中气泡运动的水模研究[J].流体力学实验与测量,1997,11(02):37. |
[5] | 蔡开科;程士富.连续铸钢原理与工艺[M].北京:冶金工业出版社,1994 |
[6] | Lopez-Ramirez S;J Barreto de J .Modeling Study of the Influence of Turbulence Inhibitors on the Molten Steel Flow,Tracer Dispersion and Inclusion Trajectories in Tundishes[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,2001,32B:615. |
[7] | Youjong KWON;Jian ZHANG;Hae-Geon LEE .Water Model and CFD Studies of Bubble Dispersion and Inclusions Removal in Continuous Casting Mold of Steel[J].ISIJ International,2006(2):257-266. |
[8] | Yuji Mike;Thomas B G .Modeling of Inclusion Removal in a Tundish[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1999,30B:639. |
[9] | Vikas SINGH;S. K. DASH;J. S. SUNITHA;S. K. AJMANI;A. K. DAS .Experimental Simulation and Mathematical Modeling of Air Bubble Movement in Slab Caster Mold[J].ISIJ International,2006(2):210-218. |
[10] | Kubo N;Ishii T;Kubota J et al.Two Phase Flow Numerical Simulation of Molten Steel and Argon Gas in a Continuous Casting Mold[J].ISIJ International,2002,42(I1):1251. |
[11] | 陈登福,曾丁丁,任常富,毕建明,张正祥,温德智,罗敏,张荣,周刚.方坯连铸长水口-吹氩无氧化浇铸技术[J].特殊钢,2004(01):48-50. |
[12] | 张炯明;赫冀成;李宝宽 .吹入气体对连铸结晶器流体流动的影响[J].金属学报,1995,31(06):269. |
[13] | 王福军.计算流体动力学分析-CFD软件原理与应用[M].北京:清华大学出版社,2004 |
[14] | 储少军,牛强,吴铿,杨天钧.泡沫化指数在冶金熔体中适用性的探讨[J].化工冶金,1998(02):179-185. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%