Analysis of Surface Integrity in Drilling Metal Matrix and Hybrid Metal Matrix Composites

材料科学技术（英文）, 2012, 28(8): 761-768.

Analysis of Surface Integrity in Drilling Metal Matrix and Hybrid Metal Matrix Composites

^1, , ^2, , ^3,

1.Department of Mechanical Engineering, Sri Chandrasekharendra Saraswathi Viswa Maha Vidyalaya University, Enathur, Kanchipuram 631561, India

2.Department of Mechanical Engineering, Sri Sai Ram Institute of Technology, Chennai 600044, India

3.Department of Mechanical Engineering, University of Aveiro, Campus Santiago, 3810-193 Aveiro, Portugal

基金项目: Acknowledgements The authors express their sincere gratitude to authorities of SCSVMV University, Kanchipuram, India for funding and supporting this project work

关键词：金属基复合材料 , 加工表面完整性 , 混合型 , 完整性分析 , 涂层硬质合金 , 混杂复合材料 , 计算机数字控制 , 扫描电子显微镜

Analysis of Surface Integrity in Drilling Metal Matrix and Hybrid Metal Matrix Composites

Keywords： Hybrid composites , Scanning electron microscopy (SEM) , Subsurface , Drilling ,

Hybrid metal matrix composites consist of at least three constituents-a metal or an alloy matrix and two reinforcements in various forms, bonded together at the atomic level in the composite. Despite their higher specific properties of strength and stiffness, the non homogeneous and anisotropic nature combined with the abrasive reinforcements render their machining difficult. In this paper, the surface integrity of machining in drilling hybrid composites has been discussed. Drilling tests are carried out at different spindle speed, feed rates, and different drill tool materials to investigate the effect of the various cutting parameters on the surface quality and the extent of the deformation of drilled surface due to drilling. Materials used for the present investigation are A1356/IOSIC （wt%） metal matrix and A1356/10SiC-3mica （wt%） hybrid composites. The composites are fabricated using stir casting route. The drilling tests are conducted on vertical computer numeric control （CNC） machining center using carbide, coated carbide and polycrystalline diamond （PCD） drills. The surface roughness decreases with increasing spindle speed and increases with increasing feed rate. The machined surface is analyzed by scanning electron microscopy （SEM）. SEM images of the machined surfaces indicate the presence of grooves and pits. Microhardness depth profiles indicate that the subsurface damage is limited to the top of 100-250 μm.

参考文献

[1]	B. Mohan;A. Rajadurai;K.G. Satyanarayana .Electric discharge machining of Al-SiC metal matrix composites using rotary tube electrode[J].Journal of Materials Processing Technology,2004(0):978-985.
[2]	Y. Sahin;M. Kok;H. Celik .Tool wear and surface roughness of Al_2O_3 particle-reinforced aluminium alloy composites[J].Journal of Materials Processing Technology,2002(1/3):280-291.
[3]	S. Basavarajappa;G. Chandramohan;M. Prabu;K. Mukund;M. Ashwin .Drilling of hybrid metal matrix composites-Workpiece surface integrity[J].International Journal of Machine Tools & Manufacture: Design, research and application,2007(1):92-96.
[4]	A. Manna;B. Bhattacharyya .A study on different tooling Systems during machining of Al/SiC-MMC[J].Journal of Materials Processing Technology,2002(3):476-482.
[5]	M. Ramulu;P. N. Rao;H. Kao .Drilling of (Al{sub}2O{sub}3)p/6061 metal matrix composites[J].Journal of Materials Processing Technology,2002(1/2):244-254.

上一张下一张

计量

下载量()
访问量()

作者相关

在本站搜索
在百度学术搜索
在万方数据库搜索
在CNKI搜索

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

Analysis of Surface Integrity in Drilling Metal Matrix and Hybrid Metal Matrix Composites

Analysis of Surface Integrity in Drilling Metal Matrix and Hybrid Metal Matrix Composites

参考文献