本文对不同复合角的典型单排孔冷却结构的平板气膜冷却特性进行了实验研究,研究对象为α为30°,β分别为30°、45°、60°的射流孔板,对它们在不同吹风比条件下的绝热气膜冷却效率分布特性进行了分析.实验结果表明,所有复合角条件下的冷却性能都优于相同条件下的简单角; M=0.5、β=60°时的冷却性能明显优于其他两个复合角;M=1.0时.三者的下游横向平均冷却效率相差不大; M=1.5、β=30°时的冷却性能最优.
参考文献
| [1] | P M Ligrani;S Ciriello;D T Bishop .Heat Transfer,Adiabatic Effectiveness,and Injectant Distributions Downstream of a Single Row and Two Stagger Rows of Compound Angle Film Cooled Holes[J].Journal of Turbomachinery Transactions of the ASME,1992,114:687-700. |
| [2] | P M Ligrani;J M Wigle;S Ciriello et al.Film Cooling Form Holes with Compound Angle Orientations:Part 1-Results Downstream of Two Staggered RoWS of Holes with 3D Spanwise Spacing[J].ASME Journal of Heat Transfer,1994,116:341-352. |
| [3] | P M Ligrani;J M Wigle;S Ciriello et al.Film Cooling Form Holes with Compound Angle Orientations:Part 1-Resuits Downstream of Two Staggered Rows of Holes with 6D Spanwise Spacing[J].ASME Journal of Heat Trailsfer,1994,116:353-362. |
| [4] | B Sen;D L Schmidt;D G Bogard .Film Cooling with Compound Anglc Holes:Heat nansfer[J].Journal of Turbomachinery Transactions of the ASME,1989,111:57-62. |
| [5] | Hasan N;Acharya S;Ekkad S V.Film Cooling Form a Single Row of Cylindrical Angled Holes with Triangular TabS Having Different Orientation[A].,2001 |
| [6] | D. L. Schmidt;B. Sen;D. G. Bogard .Film cooling with compound angle holes: adiabatic effectiveness[J].Journal of turbomachinery,1996(4):807-813. |
| [7] | S V Ekkad;D Zapata;J C Han .Film EfFectiveness over a Flat Surface with Air and CO2 Injection Through Compound Angle Holes Using a Transient Liquid Crystal Image Method[J].Journal of Turbomachinery Transactions of the ASME,1997,119:587-592. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%