通过SEM和AFM研究了IF440高强钢钢板入锅温度和浸镀时间对镀层抑制层组织结构的影响.结果表明,抑制层的组织结构分为粗晶区Fe2 Al5相和细晶区FeAl3相,并且随钢板入锅温度升高和浸镀时间增加,细晶区晶粒逐渐长大,直至与粗晶区晶粒尺寸一致,抑制层晶粒粗化,致密性下降致使其抑制作用降低.IF440高强钢适宜热镀锌工艺:钢板入锅温度为460 ～470℃,浸镀时间为4～6s.
参考文献
| [1] | 张启富;刘邦津;黄建中.现代钢带连续热镀锌[M].北京:冶金工业出版社,2007:460-467. |
| [2] | Monojit D;Shiv B S .Effect of strip temperature on the formation of an Fe2Al5 inhibition layer during hot-dip galvanizing[J].Scripta Matefialia,2009,60(08):643-646. |
| [3] | Chen L H;Richard F;Joseph M D.Short term formation of the inhibition layer during continuous hot-dip galvanizing[A].Osaka,2007:321-326. |
| [4] | Paik D J;Kim M S;Jee C W.Reactions of the steel substrates in a molten zinc bath to form an inhibition layer at the interface and precipitation of the dross particles during galvannealing process[A].Osaka,2007:315-320. |
| [5] | Tomohiro SASAKI;Takao YAKOU .Effects of Heat Treatment Conditions on Formation of Fe-Al Alloy Layer during High Temperature Aluminizing[J].ISIJ International,2007(7):1016-1022. |
| [6] | Chen H B;Yang K C;Hsieh C K.Effect of Galvanizing parameters on the microstructure of hot-dip galvaied steel sheet for automobotive panals[A].Osaka,2007:297-302. |
| [7] | 袁训华,江社明,张启富.BH390钢热镀锌抑制层及其合金化镀层界面结构[J].材料热处理学报,2011(05):127-132. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%