Ti-48Al-2Cr-2Nb automobile exhaust valves were formed with permanent mold centrifugal cast method and their surface layer structure, microstructure, elements distribution and mechanical properties were analyzed by SEM, XRD and EMPA etc. Furthermore, the HIPped valves were tested on 483Q diesel engine. Results showed that the element distribution of TiAl based alloy exhaust valves was uniform and their microstructure was refined. The typical mechanical properties of HiPped exhaust valves were sigma (b)=670 MPa, sigma (0.2)=527.5 MPa and delta =3%. Engine test showed that the valves had excellent airtightness and wear resistance properties and satisfied the requirements of engine successfully.
参考文献
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%