欢迎登录材料期刊网

材料期刊网

高级检索

本文在溶胶凝胶法制备碳包覆LiFePO4/C锂离子电池正极材料的基础上,对溶胶进行机械球磨活化以进一步优化LiFePO4/C复合材料的结构和形貌,并通过原位引入Fe2P等方法,提高其高倍率性能。采用XRD、SEM、元素分析等材料结构测试分析方法和恒电流充放电及电化学阻抗谱电化学测试技术,对溶胶机械活化及不同溶胶溶剂对LiFePO4/C材料结构和电化学性能的影响进行了研究。研究结果表明,机械活化能有效减小LiFePO4/C颗粒的尺寸及改善其分散性,并能改变Fe2P相的含量。溶胶机械活化处理后的LiFePO4/C在不同倍率下的放电容量明显增加。相对于蒸馏水,乙醇作为溶胶溶剂获得的LiFePO4/C材料具有更好的倍率性能,其在1C和10C的容量分别达到136mAh/g和90mAh/g。

Mechanical activation for the sol has been introduced in a sol-gel method to synthesize LiFePO4/C cathode materials used for lithium ion batteries in order to optimize the structure and morphology of LiFePO4/C.By means of the in situ introduction of the high electron conductivity Fe2P phase,the capability of the synthesized LiFePO4/C product has been effectively improved.The effects of the mechanical activation of the sol and different solvents on the structure and electrochemical properties of LiFePO4/C composites have been studied by using X-ray diffractometry(XRD),scanning electron microscopy(SEM),electrochemical impedance spectroscopy(EIS),element analysis and electrochemical testing of galvanostatic charge-discharge etc.The results show that mechanical activation of sol plays an important role in reducing the particle size of LiFePO4 and the agglomeration,and hence,improves the high-rate capability.The amount of Fe2P formed has also been changed by the mechanical activation and the solvents.Compared with distilled water,solvent of ethanol leads to smaller LiFePO4 particles and possess better high-rate capacity and the corresponding LiFePO4/C achieves specific capacities of 136 and 90 mAh/g at the rates of 1C and 10C,respectively.

参考文献

[1] Takao Kokubu;Yuya Oaki;Hiroaki Uchiyama;Eiji Hosono;Haoshen Zhou;Hiroaki Imai .Biomimetic Synthesis of Metal Ion-Doped Hierarchical Crystals Using a Gel Matrix: Formation of Cobalt-Doped LiMn_(2)O_(4) with Improved Electrochemical Properties through a Cobalt-Doped MnCO_(3) Precursor[J].Chemistry, an Asian journal,2010(4):792-798.
[2] R.Singhal;J.J.Saavedra-Aries;R.Katiyar et al.SpinelLi Mn2-xNixO4cathode materials for high energy density lithiumion rechargeable batteries[J].Journal of Renewable andSustainable Energy,2009,1(02):023102-021-10.
[3] Bruno H. Freitas;Fabio A. Amaral;Nerilso Bocchi;Marcos F. S. Teixeira .Study of the potentiometric response of the doped spinel Li_(1.05)Al_(0.02)Mn_(1.98)O_4 for the optimization of a selective lithium ion sensor[J].Electrochimica Acta,2010(20):5659-5664.
[4] Padhi AK.;Goodenough JB.;Nanjundaswamy KS. .PHOSPHO-OLIVINES AS POSITIVE-ELECTRODE MATERIALS FOR RECHARGEABLE LITHIUM BATTERIES[J].Journal of the Electrochemical Society,1997(4):1188-1194.
[5] Ying Wang;Bing Sun;Jinsoo Park .Morphology control and electrochemical properties of nanosize LiFePO_4 cathode material synthesized by co-precipitation combined with in situ polymerization[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2011(3):1040-1044.
[6] Y. Ding;Y. Jiang;F. Xu;J. Yin;H. Ren;Q. Zhuo;Z. Long;P. Zhang .Preparation of nano-structured LiFePO4/graphene composites by co-precipitation method[J].Electrochemistry communications,2010(1):10-13.
[7] J.Liu;F.K.Liu;G.L.Yang et al.The preparation ofconductive nano-LiFePO4/PAS and its electrochemicalperformance[J].Electrochimica Acta,2010,55(03):1067-1071.
[8] Cara M. Doherty;Rachel A. Caruso;Bemd M. Smarsly .Colloidal Crystal Templating to Produce Hierarchically Porous LiFePO4 Electrode Materials for High Power Lithium Ion Batteries[J].Chemistry of Materials: A Publication of the American Chemistry Society,2009(13):2895-2903.
[9] V. Koleva;E. Zhecheva;R. Stoyanova .A new phosphate-formate precursor method for the preparation of carbon coated nano-crystalline LiFePO_4[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2009(1/2):950-957.
[10] Oh, SW;Myung, ST;Bang, HJ;Yoon, CS;Amine, K;Sun, YK .Nanoporous Structured LiFePO4 with Spherical Microscale Particles Having High Volumetric Capacity for Lithium Batteries[J].Electrochemical and solid-state letters,2009(9):A181-A185.
[11] Bing Zhao;Yong Jiang;Haijiao Zhang;Haihua Tao;Mingyang Zhong;Zheng Jiao .Morphology and electrical properties of carbon coated LiFePO_4 cathode materials[J].Journal of Power Sources,2009(1):462-466.
[12] Hai-Ming Xie;Rong-Shun Wang;Jie-Rong Ying;Ling-Yun Zhang;Abraham F. Jalbout;Hai-Ying Yu;Gui-Ling Yang;Xiu-Mei Pan;Zhong-Min Su .Optimized LiFePO_4-Polyacene Cathode Material for Lithium-Ion Batteries[J].Advanced Materials,2006(19):2609-2613.
[13] Sung Woo Oh;Seung-Taek Myung;Seung-Min Oh;Kyu Hwan Oh;Khalil Amine;Bruno Scrosati;Yang-Kook Sun .Double Carbon Coating of LiFePO_4 as High Rate Electrode for Rechargeable Lithium Batteries[J].Advanced Materials,2010(43):4842-4845.
[14] Byoungwoo Kang;Gerbrand Ceder .Battery Materials For Ultrafast Charging And Discharging[J].Nature,2009(7235):190-193.
[15] Yoshihiro Kadoma;Jung-Min Kim;Katsutoshi Abiko;Keitaro Ohtsuki;Koichi Ui;Naoaki Kumagai .Optimization of electrochemical properties of LiFePO_4/C prepared by an aqueous solution method using sucrose[J].Electrochimica Acta,2010(3):1034-1041.
[16] Y.Liu;C.Cao;J.Li;X.Xu .A novel synthesis of LiFePO4composites for Li-ion batteries[J].Journal of AppliedElectrochemistry,2010,40(02):419-425.
[17] Zhou, Y.;Wang, J.;Hu, Y.;O'Hayre, R.;Shao, Z. .A porous LiFePO_4 and carbon nanotube composite[J].Chemical communications,2010(38):7151-7153.
[18] S.Y.Chung;J.T.Bloking;Y.M.Chiang .Electronicallyconductive phospho-olivines as lithium storage electrodes[J].Nature Materials,2002,1(02):123-128.
[19] Yucui Ge;Xuedong Yan;Jing Liu;Xianfa Zhang;Jiawei Wang;Xingguang He;Rongshun Wang;Haiming Xie .An optimized Ni doped LiFePO_4/C nanocomposite with excellent rate performance[J].Electrochimica Acta,2010(20):5886-5890.
[20] Ning Hua;Chenyun Wang;Xueya Kang;Tuerdi Wumair;Ying Han .Studies of V doping for the LiFePO_4-based Li Ion batteries[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2010(1):204-208.
[21] Porous micro-spherical aggregates of LiFePO_4/C nanocomposites: A novel and simple template-free concept and synthesis via sol-gel-spray drying method[J].Journal of Power Sources,2010(19):P.6873.
[22] Youyong Liu;Chuanbao Cao;Jing Li .Enhanced electrochemical performance of carbon nanospheres-LiFePO_4 composite by PEG based sol-gel synthesis[J].Electrochimica Acta,2010(12):3921-3926.
[23] Mingxia Gao;Yan Lin;Yuhui Yin;Yongfeng Liu;Hongge Pan .Structure optimization and the structural factors for the discharge rate performance of LiFePO_4/C cathode materials[J].Electrochimica Acta,2010(27):8043-8050.
[24] Kim, JK;Cheruvally, G;Ahn, JH .Electrochemical properties of LiFePO4/C synthesized by mechanical activation using sucrose as carbon source[J].Journal of Solid State Electrochemistry,2008(7/8):799-805.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%