采用原位反应制得纯净的TiB 2/7075铝基复合材料，并经保温二弯通道挤压成形制备半固态TiB 2/7075复合材料。研究表明：在增强颗粒冲刷搅拌和对流的共同作用下，熔体迅速形核并球化；经二弯石墨通道挤压成形，3%TiB 2/7075(质量分数)铝基复合材料晶粒尺寸达到35.9μm，形状因子为0.97；颗粒含量为4.5%时，晶粒尺寸达到22.53μm，形状因子为0.98；颗粒含量为6%时，晶粒尺寸达到28.0μm，形状因子为0.92。
Novel reactive technique was employed in the synthesis of 7075 Al matrix composites, and TiB2/7075 semi-solid composites were prepared by rheocasting forming after flowed through two serpentine graphite channel. The results show that the combination of particles scouring and convection lead to nucleation and globalization of the grain. After the rheocasting process with two serpentime graphites, the mean grain size and shape factor of the 3%TiB2/7075 (mass fraction) composite are 35.7 μm and 0.97, respectively. The mean grain size and shape factor of the 4.5%TiB2/7075 composite and 6%TiB2/7075 composite are 22.53μm, 0.98 and 28μm, 0.92, respectively.
参考文献
| [1] | FLEMINGS M C .Behavior of metal alloys in the semi-solid state[J].METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,1991,22(05):957-981. |
| [2] | Toshio Haga;Shinsuke Suzuki .Casting of aluminum alloy ingots for thixoforming using a cooling slope[J].Journal of Materials Processing Technology,2001(1/3):169-172. |
| [3] | Ren-Guo Guan;Zhan-Yong Zhao;Chun-Guang Dai .A Novel Semisolid Rheo-Rolling Process of AZ31 Alloy with Vibrating Sloping Plate[J].Materials and Manufacturing Processes,2013(1/3):299-305. |
| [4] | 陈正周,毛卫民,吴宗闯.蛇形通道浇注工艺参数对半固态A356铝合金浆料的影响[J].中国有色金属学报（英文版）,2011(05):985-990. |
| [5] | 杨小容,毛卫民,高冲.采用蛇形管通道浇注法制备半固态浆料[J].中国有色金属学报,2009(05):869-873. |
| [6] | 杨小容,毛卫民,孙斌煜.采用蛇形通道制备较大容量A356铝合金半固态浆料[J].中国有色金属学报（英文版）,2011(03):455-460. |
| [7] | GUO H M;YANG X J;HU B .Rheocasting of A356 alloy by low superheat pouring with a hearing field[J].Acta metallurgica sinica(English Letter),2006,19(05):328-334. |
| [8] | GUO H M;YANG X J;HU B .Low superheat pouring with a shear field in rheocasting of aluminum alloys[J].JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION,2008,2:54-59. |
| [9] | B. Yang;F. Wang;J. S. Zhang .Microstructural characterization of in situ TiC/Al and TiC/Al-20Si-5Fe-3Cu-1Mg composites prepared by spray deposition[J].Acta materialia,2003(17):4977-4989. |
| [10] | Yang, B.;Gan, G.;Yang, L.;Sun, M.;Zhang, H.;Fang, Z.Z. .Microstructural characterization and wear behavior of in situ TiC/7075 composites synthesized by displacement reactions and spray forming[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(18):5649-5655. |
| [11] | GAN G S;ZHANG L;LU Y;YANG B .Effect of TiB 2 additions on the microstructure of spray-formed Si-30Al composite[J].Transactions of Nonferrous Metals Society of China,2011,21:2242-2247. |
| [12] | YANG B;SUN M;GAN G S;ZHANG H B FANG Z Z .In situ Al2O3 particle-reinforced Al and Cu matrix composites synthesized by displacement reactions[J].Journal of Alloys and Compounds,2011,494(1/2):261-265. |
| [13] | H.B. Michael Rajan;S. Ramabalan;I. Dinaharan;S.J. Vijay .Synthesis and characterization of in situ formed titanium diboride particulate reinforced AA7075 aluminum alloy cast composites[J].Materials & design,2013(Feb.):438-445. |
| [14] | 李鹏廷,李云国,聂金凤,刘相法.合成过程对Al-Ti-B合金中TiB2粒子三维形貌的影响[J].中国有色金属学报（英文版）,2012(03):564-570. |
| [15] | RAJASEKARAN N R;SAMPATH V .Effect of in-situ TiB2 particle addition on the mechanical properties of AA 2219 Al alloy composite[J].Journal of Minerals & Materials Characterization&Engineering,2011,10(06):527-534. |
| [16] | CHEN Dengbin,ZHAO Yutao,LI Guirong,ZHENG Meng,CHEN Gang.Mechanism and Kinetic Model of In-situ TiB2/7055Al Nanocomposites Synthesized under High Intensity Ultrasonic Field[J].武汉理工大学学报（材料科学版）（英文版）,2011(05):920-925. |
| [17] | Gui-sheng Gan;Bin Yang;Huan-chuan Wu .The Effect of TiB_2 Particles on the Microstructure of Semi-Solid 7075 Alloy Slurry[J].Materials transactions,2012(6):1178-1183. |
| [18] | 张虎,高文理,金云学,曾松岩.Evolution of solid-liquid interface morphology of primary TiB2 in non-equilibrium solidified Ti-Al-B alloys[J].中国有色金属学会会刊(英文版),2002(03):437-440. |
| [19] | 张虎,高文理,张二林,曾松岩.Ti-54Al-xB合金中TiB2的形貌演变及生长机理[J].金属学报,2002(07):699-702. |
| [20] | 张虎,高文理,张二林,曾松岩,何建平.硼含量对Ti-50Al-xB合金中TiB2微观形貌的影响[J].材料工程,2001(12):36-39. |
| [21] | 高文理,张虎,王群,曾松岩,陈振华.TiB2/Ti-Al复合材料中棒状TiB2晶体的微观特征[J].特种铸造及有色合金,2005(06):321-322. |
| [22] | 高文理,张虎,张二林,曾松岩.TiAl-B合金中TiB2微观形态的主要存在方式[J].铸造技术,2003(03):176-178. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%