对ERNiCrMo-3镍基焊丝钨极氩弧焊（GTAW）焊接的T92/HR3C异种钢管接头,进行650℃直至1143.5 h的高温时效处理,研究时效过程中接头显微组织结构和力学性能的变化规律。结果表明：时效后接头的室温拉伸断口都位于T92母材。随时效时间的延长,接头各区域的冲击韧性单调降低,但接头强度、T92侧热影响区（HAZ）及母材的硬度先降后升,时效501.1 h后趋于稳定,这归因于不同时效时间下T92侧HAZ及母材中碳化物的形态及聚集状态的差异。HR3C侧HAZ产生时效脆化,其冲击断口呈沿晶断裂的断口特征。
Using Ni-based welding wires of ERNiCrMo-3,T92/HR3C dissimilar steel joints were prepared by gas tungsten arc welding（GTAW）.After aging at 650 ℃ for time up to 1143.5 h,microstructure and mechanical properties of the welding joints were studied.The results show that tensile fracture of the aged joints always takes place in T92 base metal.As increasing the aging time,the impact toughness values of the joints decrease monotonously,but the tensile strength of the joints and the hardness values of the HAZ and base metal of T92 decrease when aged for 160.5 h and then increase when aged for 501.1 h and 1143.3 h.This is attributed to the different morphology and distribution of the carbides in T92 steel aged for different time.Intergranular impact fracture is observed for HAZ of HR3C steel of the joints after aging,indicating the occuring of age embrittlement.
参考文献
| [1] | 杨富;章应霖;任永宁.新型耐热钢焊接[M].北京:中国电力出版社,2006:6-12. |
| [2] | 凌伟,葛辽海,任振安,孙大千.马氏体和奥氏体不锈钢TIG焊端接接头失效分析[J].焊接学报,2007(05):89-92. |
| [3] | L. Falat;A. Vyrostkova;V. Homolova .Creep deformation and failure of E911/E911 and P92/P92 similar weld-joints[J].Engineering failure analysis,2009(7):2114-2120. |
| [4] | 常铁军,龚正春,李子峰,王长柏.T91钢TIG+MIG焊接接头性能及组织[J].焊接学报,2005(12):59-61,88. |
| [5] | SHU Guo-gang,DING Hui,ZHAO Yan-fen,XUE Fei,ZHAO Ling-song,ZHANG Lu,LIU Jiang-nan,WANG Zheng-pin.Analysis of High-temperature Boiler Tube Failure for T91 &T22[J].材料热处理学报,2004(05):291-296. |
| [6] | 王学,潘乾刚,陈方玉,陶永顺,彭芳芳.P92钢高温蠕变损伤分析[J].材料热处理学报,2010(02):65-69. |
| [7] | Abe F;Masaaki T .Microstructure and creep strength of welds in advanced ferrite power plant steels[J].Science and Technology of Welding & Joining,2004,9(01):22-30. |
| [8] | 刘俊建,陈国宏,余新海,王家庆,化建,宋有明,张涛,汤文明.T92/HR3C异种钢焊接接头的组织结构和力学性能[J].材料热处理学报,2011(02):54-60. |
| [9] | 常铁军,龚正春,李明菲,王宇.10Cr9Mo1VNb钢高温时效后的性能及组织研究[J].材料热处理学报,2006(05):60-63. |
| [10] | 王延峰,郑开云,吾之英,王起江.T92钢管长时高温组织稳定性及性能研究[J].动力工程学报,2010(04):245-252. |
| [11] | 李太江,刘福广,范长信,姚兵印.超超临界锅炉用新型奥氏体耐热钢HR3C的高温时效脆化研究[J].热加工工艺,2010(14):43-46. |
| [12] | Mayer K H;Cerja K H;Hofer P.Advanced materials for 21st century turbines and power plant[A].Cambridge:Maney Materials Science,2000 |
| [13] | 史志刚,侯安柱,李益民.T91钢运行过程中力学性能和微观组织的变化[J].动力工程,2005(05):742-746. |
| [14] | Vanstone R W;Cerja K H;Fodyna V.Microstructural development in advanced 9-12% Cr creep resisting steels:a collaborative investigation in cost 501/3 WP11[A].London:Institute of Materials,1997 |
| [15] | 赵麦群,戴熹,葛利玲,符长璞.10Cr9Mo1VNbN钢无应力时效的组织与性能研究[J].材料热处理学报,2003(03):12-16. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%