Influence of hot deformation and subsequent austempering on the mechanical properties of hot rolled multiphase steel was investigated. Thermo-mechanical control processing (TMCP) was conducted by using a laboratory hot rolling mill, where three different kinds of finishing rolling reduction, and austemperings with various isothermal holding duration were applied. The results have shown that a multiphase microstructure consisting of polygonal ferrite, granular bainite and larger amount of stabilized retained austenite can be obtained by controlled rolling processes. Mechanical properties increase with increasing the amount of deformation because of the stabilization of retained austenite. Ultimate tensile strength (σb), total elongation (δ)36% and 28476 MPa%, respectively) at optimal processes.
参考文献
| [1] | H.-Y. Yu;Z.-Q. Lin;G.-L Chen .Overall stress-strain relationship of cold rolled transformation induced plasticity multiphase steels[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2005(3):311-315. |
| [2] | L. SAMEK;E. De MOOR;J. PENNING .Influence of Alloying Elements on the Kinetics of Strain-Induced Martensitic Nucleation in Low-Alloy, Multiphase High-Strength Steels[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2006(1):109-124. |
| [3] | J. Bouquerel;K. Verbeken;B.C. De Cooman .Microstructure-based model for the static mechanical behaviour of multiphase steels[J].Acta materialia,2006(6):1443-1456. |
| [4] | C A M Streicher;J G Speer;D K Matlock;C B C De and D L Williamson .[J].Metallurgical and Materials Transactions,2005,36A(04):907. |
| [5] | D Ei;N Hoda .[J].Steel Research International,2005,76(11):822. |
| [6] | K I Sugimoto;B Yu;Y I Mukai;S Ikeda .[J].ISIJ International,2005,45(08):1194. |
| [7] | Lin LI,B.C.De Cooman,P.Wollants,Yanlin HE,Xiaodong ZHOU.Effect of Aluminum and Silicon on Transformation Induced Plasticity of the TRIP Steel[J].材料科学技术学报(英文版),2004(02):135-138. |
| [8] | Yu CHEN,Guoyi TANG,Fangyu CHEN,Pinghe LI,Sunbing ZHOU.Research on Retained Austenite for Advanced Aluminum-containing Hot-rolled TRIP Steel[J].材料科学技术学报（英文版）,2005(06):813-816. |
| [9] | Yu CHEN,Guoyi TANG,Feipeng LI,Yu ZHANG,Xiao CHEN,Pinghe LI,Wei LIU,Qing LIU.Microstructure Features with Ultrafined and Purified Grains for Si-Mn Hot-rolling TRIP Steel[J].材料科学技术学报（英文版）,2005(06):799-802. |
| [10] | A Z Hanzaki;D Hodgson;S Yue .[J].ISIJ International,1995,35(03):324. |
| [11] | E V Pereloma;I B Timokhina;P D Hodgson .[J].Materials Science and Engineering,1999,273:448. |
| [12] | T Heller;A Nuss .[J].Ironmaking and Steelmaking,32(04):303. |
| [13] | H.-B. RYU;J.G. SPEER;J.R WISE .Effect of Thermomechanical Processing on the Retained Austenite Content in a Si-Mn Transformation-Induced-Plasticity Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2002(9):2811-2816. |
| [14] | E Girault;P Jacques;P Harlet;K Mols J Van Humbeek E Aernoudt and F Delannay .[J].Materials Characterization,1998,40:111. |
| [15] | R L Miller .[J].Transactions ASM,1964,57:892. |
| [16] | S Yue;A Dichiro;A Z Hanzaki .[J].Journal of The Minerals,Metals & Materials Society,1997,49:59. |
| [17] | S Godet;P Harlet;P J Jacques .[J].Steel Research International,2006,77(04):271. |
| [18] | N C Goel;J P Chakravarty;K Tangri .[J].Metallurgical and Materials Transactions,1987,18A(05) |
| [19] | J D Verhoeven.Fundamentals of Physical Metallurgy[M].John Wiley Sons,New York,1975:423. |
| [20] | A Z Hanzaki;P D Hodgson .[J].ISIJ International,1995,35(01):79. |
| [21] | Z Li;D Wu .[J].ISIJ International,2006,46(01):121. |
| [22] | I. B. TIMOKHINA;P. D. HODGSON;E. V. PERELOMA .Effect of Deformation Schedule on the Microstructure and Mechanical Properties of a Thermomechanically Processed C-Mn-Si Transformation-Induced Plasticity Steel[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2003(8):1599-1609. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%