欢迎登录材料期刊网

材料期刊网

高级检索

The variation law of cladding thickness as well as the structures and properties of H90-steel clad strip produced by inversion solidification was studied.The interface bonding mechanisms were approached.It is found that the thickness of H90 cladding goes sequentially through the solidification growth stage,holding stage,and remelting stage,with an increase in immersion time.The higher the preheating temperature of the steel coil,the thicker is the maximum cladding thickness.Observation by using optical microscopy (OM) and the electron probe microanalyzer (EPMA) shows that the microstrueture of H90 cladding is composed of equiaxed grains,and that interdiffusion between Cu and Fe at interface occurs but obvious diffusion of Zn and the intermetallic layer are not observed.The diffusion layer is thin and about 4 μm.Multipass small reduction cold rolling and repeated bending tests show that the interface is firmly bonded.Tensile test shows that the mechanical properties of the as-clad strips can meet the requirements of GB5213-2001 for the F-grade deep-drawing steel plate though there is a slight difference in the mechanical properties among the clad strips with different cladding thickness.

参考文献

[1] 李宝绵,李兴刚,许光明,崔建忠.铜/钢复合材料的研究及应用[J].材料导报,2002(02):22-24,30.
[2] Alonso Rasgado M T;Davey K;Clark L D .Bi-Metallic Dies for Rapid Die Casting[J].Journal of Materials Processing Technology,2006,175:109.
[3] LU Zhan-zhu;LIU Shun-fu;ZHAO Fu-ling.Application of Explosively Welded Copper/Steel Clad Material in EDM (in Chinese)[J].Electromachining and Mould,2002(06):9.
[4] Hongzhi Yah;John G A .Study of Warm and Cold Roll-Bonding of an Aluminum Alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,385A:410.
[5] Raghukandan K .Analysis of the Explosive Cladding of Cu-Low Carbon Steel Plates[J].Journal of Materials Processing Technology,2003,139:673.
[6] 田雅琴,秦建平,李小红.金属复合板的工艺研究现状与发展[J].材料开发与应用,2006(01):40-43.
[7] Danesh Manesha H;Karimi Taherib A .Theoretical and Experimental Investigation of Cold Rolling of Tri-Layer Strip[J].Journal of Materials Processing Technology,2005,166:163.
[8] 魏伟,史庆南.铜/钢双金属板异步轧制复合机理研究[J].稀有金属,2001(04):307-311.
[9] LI Ying-hong;QI Ke-min;ZHU Quan .Study on Cold-Roll Bonding of Steel/Brass Bi-Metal (in Chinese)[J].Iron and Steel,1997,32(04):46.
[10] William A G;McMurray P A .Bonding of Dissimilar Metals[P].US 6427904,2002-08-06.
[11] Pleschiutschigg F-P.Inversion Casting-A New Method for Producing Near-Net-Shape Cast Strips (in German)[J].Stahl Und Eisen,1994(02):47.
[12] F-P Pleschiutschnigg;I von Hagen;T El Gammal .Inversion casting of steel strip[J].Steel Times,1995(6):228-229.
[13] NI Hong-wei;CHEN Hao.Inversion Casting Stainless Steel Composite Strip:Its Characters of Bonding and Solidification Microstructure on Interface (in Chinese)[J].武汉工业大学学报,2002(01):35.
[14] LI Na,CHEN Yan-bo,MENG Xian-yun,ZHAO Hong-liang,WEN Jing-lin.Preparation of composite aluminum automobile radiator by inversion casting[J].中国有色金属学会会刊(英文版),2001(01):138-140.
[15] 孙跃军,仲伟深,高顺利,张红科.反向凝固铜/钢电车线的研究[J].铸造技术,2004(08):607-609.
[16] 方晓英,张艳莉,吴法宇.包铜钢线液固相反向凝固过程的数值模拟[J].热加工工艺,2004(01):27-28,52.
[17] Na LI,Shouren GUO,Dezhong LU,Zhuangqi HU,Jinglin Wen.Technique of Aluminum Alloy Composite by Inversion Casting[J].材料科学技术学报(英文版),2002(02):187-188.
[18] LI Bao-mian .Process and Theory Study on Inversion-Cast Cladding of H90-Steel Strip(in Chinese)[D].沈阳:东北大学,2004.
[19] Ishida T.Spreading Kinetics of Liquid Metals on Mild Steel[J].Journal of Materials Science and Technology,1988(04):830.
[20] TIAN Rong-zhang;WANG Zhu-tong.Handbook of Copper and Copper Alloy(in Chinese)[M].长沙:中南工业大学出版社,2002
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%