对Pb(Ni1/3Sb2/3)-PbZrO3-PbTiO3陶瓷烧结和压电性能的研究表明:当含有48mol%PbTiO3和少于10mol%Pb(Ni1/3Sb2/3)的粉体在850℃下煅烧2 h,得到单一钙钛矿结构,但是如果Pb(Ni1/3Sb2/3)组成在12mol%~14mol%之间时,则三方相和四方相共存.所以材料的准同相界在Pb(Ni1/3Sb2/3)=12mol%,PbZrO3=40mol%,PbTiO3=48mol%.当该组分在1260℃至1280℃烧结时得到的烧结物密度最大为7.8g/cm3.扫描电镜结果表明在1280℃时材料烧结气孔率最小.当处于准同相界的组分在1280℃烧结时,材料的机电耦合系数Kp和机械品质因数Qm分别达到最大值0.488和最小值292.5.
参考文献
[1] | Patcharin Poosanaas.[J].Journal of Electroceramics,1997(01):105. |
[2] | Stojanovic BD.;Cilense M.;Zaghete MA.;Cavalheiro AA. Paiva-Santos CO.;Longo E.;Varela JA.;Foschini CR. .Structural characterization of organometallic-derived 9.5/65/35 PLZT ceramics[J].Materials Chemistry and Physics,2001(1/3):136-141. |
[3] | Shrout T R.[J].Ferroelectrics Letters,2002(63):12. |
[4] | Ahmed Boutarfaia .Study of the solid state reaction and the morphotropic phase boundary in Pb(Zr, Ti)O{sub}3-Pb(Fe{sub}(1/5), Ni{sub}(1/5), Sb{sub}(3/5))O{sub}3 ceramics[J].Ceramics International,2001(1):91-97. |
[5] | Haiyan Chen;Jiwen Long;Zhongyan Meng .Effect of Zr/Ti ratio on the properties of PMMN-PZT ceramics near the morphotropic phase boundary[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2003(1/3):433-436. |
[6] | Galassi C;Roncari E .[J].Journal of the European Ceramic Society,1999,19:1237. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%