The high temperature deformation behavior of the 9Ni steel has been studied by the Gleeble-3500 tester. The relationship between deformation resistance and deformation degree, deformation temperature and deformation rate was revealed. The results show that when the deformation degree is less than 0.2, the deformation resistance increases by about 70 to 200 MPa, while the deformation degree varied between 0.2 and 0.4, the deformation resist- ance increases by about 30--40 MPa, when the deformation degree is larger than 0.4, the deformation resistance in- creases slowly, some become stable gradually. The influence of deformation temperature on deformation resistance is larger, and deformation resistance at higher temperature is about 160 MPa smaller than at lower temperature. Higher deformation rate leads to larger deformation resistance. The deformation resistance increases about 70 to 110 MPa with the increase of the deformation rate. A new and highly accurate mathematical model of the steel was established to describe the deformation behavior during rolling.
参考文献
| [1] | WANG Xiu-li.The State-of the-Art in Natural Gas Production[J].Journal of Natural Gas Science and Engineering,2009(01):14. |
| [2] | Mario Miana;Rafael del Hoyo;Vega Rodrigalvarez;Jose Ramon Valdes;Raul Llorens .Calculation models for prediction of Liquefied Natural Gas (LNG) ageing during ship transportation[J].Applied energy,2010(5):1687. |
| [3] | Nobuo Nakada;Junaidi Syarif;Toshihiro Tsuchigama et al.Improvement of Strength-Ductility Balance by Copper Addition in 9%Ni Steel[J].Materials and Science and Engineering,2004,374 A:137. |
| [4] | Ling Zhang;Takahito Ohmura;Akinobu Shibata;Kaneaki Tsuzaki .Characterization of local deformation behavior of Fe–Ni lenticular martensite by nanoindentation[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(7/8):1869-1874. |
| [5] | Hiromoto Kitahara;Rintaro Ueji;Masato Ueda .Crystallographic analysis of plate martensite in Fe-28.5 at. percent Ni by FE-SEM/EBSD[J].Materials Characterization,2005(4/5):378-386. |
| [6] | Hiromoto Kitahara;Rintaro Ueji;Nobuhiro Tsuji et al.Crystallographic Features of Lath Martensite in Low-Carbon Steel[J].Acta Materialia,2006,54:1279. |
| [7] | Danil'chenko V E;Sagaradze V V;I'Heritier Ph .Martensite Crystal Structure of Nickel Steel at Cryogenic Temperatures[J].Materials Science and Engineering,2003,358A:26. |
| [8] | Emadoddin E;Akbarzadeh A;Daneshi Gh .Effect of Intercriti cal Annealing on Retained Austenite Characterization in Tex-tured TRIP-Assisted Steel Sheet[J].Materials Characterization,2006,57:408. |
| [9] | ZHAO X Q;Pan T;WANG Q F et al.Effect of Intercritical Quenching on Reversed Austenite Formation and Cryogenic Toughness in QLT-Processed 9%Ni Steel[J].Journal of Iron and Steel Research International,2007,14(Supplement 1):240. |
| [10] | Lee C H;Lee S W;Yoo J Y.Enhancement of Low Temperature Toughness of Nickel Steel by Intercritical Quenching Treatment[A].Kyongju:[s.n.],1995:2035. |
| [11] | Ahn Yeon-Sang;Kim Hong-Deok;Byun Thak Sang et al.Application of Intercritical Heat Treatment to Improve Toughness of SA508C1.3 Reactor Pressure Vessel Steel[J].Nuclear Engineering and Design,1999,194:161. |
| [12] | Chunling Zhang;Dayong Cai;Bo Liao .A study on the dual-phase treatment of weathering steel 09CuPCrNi[J].Materials Letters,2004(9):1524-1529. |
| [13] | YANG Jing-hong,LIU Qing-you,SUN Dong-bai,LI Xiang-yang.Recrystailization Behavior of Deformed Austenite in High Strength Microalloyed Pipeline Steel[J].钢铁研究学报（英文版）,2009(01):75-80. |
| [14] | Sun ZQ.;Yang WY.;Qi JJ.;Hu AM. .Deformation enhanced transformation and dynamic recrystallization of ferrite in a low carbon steel during multipass hot deformation[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):201-206. |
| [15] | Anbuselvan S;Ramanathan S .Hot Deformation and Processing Maps of Extruded ZE41A Magnesium Alloy[J].Materials & Design,2010,31:2319. |
| [16] | Eghbali B;Abdollan-zadeh A .The Influence of Thermomechanieal Parameters in Ferrite Grain Refinement in a Low Car bon Nb-Microalloyed Steel[J].Scripta Materialia,2005,53:41. |
| [17] | Calvo J;Jung I H;Elwazri A M et al.Influence of the Chemical Composition on Transformation Behavior of Low Carbon Mieroalloyed Steels[J].Materials Science and Engineering,2009,520A:90. |
| [18] | ZHOU Ji-hua;GUAN Ke-zhi.Plastic Deformation Resistance of Metal[M].北京:机械工业出版社,1989 |
| [19] | CHEN Ping-yan.SPSS 13.0 Statictical Software Application Tutorials[M].Beijing:Peoplers Medic Publishing House,2005 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%