利用Gleeble - 3500热模拟机,针对汽车大梁板610L连铸坯,进行了高温热塑性试验.同时利用扫描电镜分析试样的断口性质及显微组织与塑性的关系.试验结果表明:在1 300～600℃区间存在两个脆性温度区,其中第Ⅲ脆性温度区为910 ～705℃.研究了第Ⅲ脆性区的脆化原因.为该钢种连铸和热轧工艺制度的制定提供了依据.
参考文献
| [1] | 姚贯升;景立媛.汽军用钢应用技术[M].北京:机械工业出版社,2007:499. |
| [2] | 张开坚,王义成,宋立秋,俞梦文.攀钢汽车大梁用热轧钢板的开发[J].钢铁钒钛,2000(03):44-48. |
| [3] | J. Calvo;A. Rezaeian;J.M. Cabrera .Effect of the thermal cycle on the hot ductility and fracture mechanisms of a C-Mn steel[J].Engineering failure analysis,2007(2):374-383. |
| [4] | Mintz B;Yue S;Jonas J .Hot ductility of steels and its relationship to the problem and transverse cracking during continuous casting[J].International Materials Reviews,1991,36(05):190-198. |
| [5] | 蔡开科;党紫久 .连铸钢高温力学性能专辑[JJ[J].北京科技大学学报（自然科学版）,1993,15(增刊):30. |
| [6] | Suzuki H G;Nishimura S;Imamura J.Embrittlement of steels occurring in the temperature range from 1 000 to 600 ℃[J].Transactions ISIT,1984(24):169-177. |
| [7] | Mintz B;Abu-Shosha R;Shaker M.Influence of deformation induced ferrite,grain boundary sliding,and dynamic recrystallization on hot ductility of 0.1％ ～0.75％ C steels[J].Materials Science and Technology,1993(09):907. |
| [8] | 董廷亮,岳尔斌,张晨,仇圣桃,赵沛.C、Cu、Mn对取向硅钢热塑性的影响[J].钢铁钒钛,2009(04):40-44. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%