在硫酸镍15 g/L,钨酸钠30g/L,柠檬酸35 g/L,烷基有机添加剂1.5 g/L,pH为7,温度65℃的条件下,研究了平均电流密度对脉冲镀镍钨合金镀层的外观、结合力、显微硬度、沉积速率、镀层中钨含量及表面微观形貌的影响.结果发现,随着平均电流密度的增大,镀层中钨含量增加,镀层硬度先增大而后趋于恒值.过高和过低的平均电流密度都会引起镀层缺陷,最佳的平均电流密度为5～8 A/d㎡.
参考文献
| [1] | 朱立群,李卫平.代铬镀层--Ni-W、Ni-W-B非晶态合金镀层性能研究[J].电镀与涂饰,2004(05):10-15. |
| [2] | Yuttanant Boonyongmaneerat;Sawalee Saenapitak;Kanokwan Saengkiettiyut .Reverse pulse electrodeposition of Zn-Ni alloys from a chloride bath[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2009(1/2):479-482. |
| [3] | C.K. Chung;W.T.Chang .Effect of pulse frequency and current density on anomalous composition and nanomechanical property of electrodeposited Ni-Co films[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2009(17):4800-4804. |
| [4] | F. Xiao;W. Cheng;X.J. Jin .Phase stability in pulse electrodeposited nanograined Co and Fe-Ni[J].Scripta materialia,2010(7):496-499. |
| [5] | 龚睿,柳林.钨含量对Ni-W合金镀层结构及耐蚀性能的影响[J].稀有金属材料与工程,2008(01):130-134. |
| [6] | 耿冰霜,卫英慧,侯利锋,李杉,杨海燕,许并社.不锈钢衬底化学镀Ni-W-P三元合金组织及性能研究[J].稀有金属材料与工程,2009(z1):71-75. |
| [7] | 张鹏,赵永武,陈广.脉冲电沉积Ni-W合金镀层的微观结构及摩擦学性能[J].江南大学学报（自然科学版）,2008(01):68-72. |
| [8] | Hayong Jung;Chan Hong;Junghee Ki;Jutae Kim;Bonghan Kim;Yongsug Tak .Pulse Electrodeposition of Ni-W Alloy for Trench Filling in Microelectromechanical Systems[J].Journal of nanoscience and nanotechnology,2008(10):5321-5325. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%